Installation manual

8
Gate Opener Parts List
Opener and Mounting Hardware
See Installation of the Post Bracket A
ssem
bly

pages 5 and 6
in the Installation Manual
Hairpin Clip (2)
3/8" x 1-3/8" Clevis Pin (2)
5/16" x 1-3/4" Bolt (1)
3/8" x 2" Bolt (1)
3/8" x 3" Bolt (2)
3/8" x 8" Bolt (4)
8" Nylon Cable Tie (14)
3/8" Washer (9)
3/8" Lock Washer (7)
5/16" Washer (1)
3/8" Nut (7)
5/16" Nut (1)
Hardware
Gate Opener (1)
Extra 15 Amp Fuse (1)
Receiver (1)
GTO Transmitter (1)
Warning Signs (2)
Gate Bracket (1)
4 1/2" x 4 1/2"
Setback Template (1)
Post Pivot Bracket (1)
Customer Support Card (1)
Post Bracket (2)
Closed Position
Stop Plate (1)
2" Receiver Mounting Screw (1)
®
E-Z
GATE OPENER
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Transformer (1)
®
E-Z
G
ATE OPENER
250
U
L
3
2
5
S
E
R
I
E
S
Can Cause Injury or Death
MOVING GATE