Installation manual

6
IMPORTANT SAFETY INSTRUCTIONS
Install Warning Signs
Entrapment Protection
GTO’s inherent obstruction settings may not be sensitive enough to prevent bodily injury in some circumstances. For this
reason, safety devices such as contact sensors (safety edges) and non-contact sensors (photo beams), which stop and reverse
gate direction upon sensing an obstruction, are required for augmented protection against entrapment.
Required Safety Precautions for Gates
Warning Signs
The warning signs (at right) must be
installed on both sides of the gate.
Warning signs included alert people of automatic gate operation and are required when installing the Mighty Mule 250.
Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the vehicular gate. We recommend
using the Bulldog Pedestrian Gate Lock (Call the GTO Sales Department at 1-800-543-4283) for controlled access.
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Warning Sign
Pedestrian Gate
Vehicular Gate
Bulldog Gate Lock
Contact Sensor
( recommended, not included )
Contact Sensor
( recommended, not included )
Contact Sensor
( recommended, not included )
®
E
-
Z
G
A
T
E
O
P
E
N
E
R
2
50
S
E
R
I
E
S
Can Cause Inju
ry or Death
M
O
V
I
N
G
G
A
T
E