Installation manual

24
rev 07.16.12
Use the transmitter to check the range of the receiver before
permanently mounting it.
Consider the following when mounting the receiver:
•Standardreceivercablelengthis10feet(receiverswitha
longer cable are available as special order items; call the
GTO Sales Department). NEVER splice receiver cable!
•DONOTruncableinconduitcontainingacwiring.
•Thereceiverrangecanvaryfrom50to100feetdepending
upon weather, topography, and external interference.
NOTE: Do not mount upside down.
FCC Regulation
This device complies with FCC rules Part 15. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation.
Working distance may vary due to circumstances beyond our control.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
MOUNTING THE RECEIVER
Receiver mounted
on piece of wood