Installation manual

rev 07.16.12

IMPORTANT SAFETY INSTRUCTIONS

Warning signs (2 enclosed) to be installed on each side

of the gate (3–5 feet above the bottom of the gate)

Product identification label (1)

installed under rear mount on arm.

Logo and warning labels (2) installed on each side of opener housing

GTO DC SWING SERIES

Conforms to UL325

5th Edition Standards

Serial No.

MM350-

0000000

xxxxxx

Gates That Open, LLC - Tallahassee, Florida USA

If any of these signs or warning decals become damaged, illegible or missing, replace them immediately.

Contact GTO at 1-800-543-GATE (4283) for free replacements.

9901178

1-800-543-GATE (4283) • www.mightymule.com

1. KEEP CLEAR! Gate may move at any time.

2. Do not allow children to operate gate or play in gate area.

3. This gate is for vehicles only. Pedestrians must use separate entrance.

Can Cause Injury or Death

MOVING

GATE!

E-Z GATE OPENER

UL325 SERIES

350

! !

TO MANUALLY OPEN AND CLOSE THE GATE

1. Turn opener power switch OFF.

2. Disconnect front or rear mount from

mounting bracket.

3. Pull opener away from mounting bracket

and move gate.

Disconnect opener ONLY when the power

switch is OFF and the gate is not moving.

Maximum Gate: 550 lbs. (158.8 kg); 16 ft. (4.9 m) • Voltage: 12 Vdc; Frequency: 0Hz; Power: 25W • Class I Vehicular Swing Gate Operator