Installation manual

Mounting the Opener

Step 11

Attach the opener to the securely bolted post bracket assembly and gate bracket using clevis pins, washers, and hairpin clips,

or optional Master

Pin Locks (see Accessory Catalog). Verify that the opener is level and adjust the post bracket assembly

if necessary.

Mounting the Second Opener

Step 12

Mount the second opener on the remaining gate leaf by repeating Step 3 through Step 11, starting on page 12.

After you have mounted the second opener, proceed to Step 13 on the next page.

Level Opener

Fence Post

Gate In Open Position 



LEVEL horizontal cross member

Post Bracket Assembly

bolted to fence post

Clevis Pin, Washer, and Hairpin Clip

Gate Bracket bolted

to gate cross member

E-Z G

ATE O

PENER