Safety & Operating Instructions

Specifications
Models
WC475 Manual and Electric Start Models
WC575E
Engine
Briggs & Stratton (See Engine Manual for Engine
Specifications)
Briggs & Stratton Electric Start (See Engine Manual
for Engine Specifications)
Series
XR1650
XR2100
Chipping Capacity
4-3/4" Diameter
5-3/4" Diameter
Number of
Chipper Knives
1
1
Chipper Knife Size
6-1/4" x 1-1/4" x 9/32"
7-1/4" x 1-1/4" x 9/32"
Chipper Knife
Material
Heat Treated Tool Steel
Heat Treated Tool Steel
Adjustable Wear
Plate
Yes
Yes
Chipper Flywheel
17-3/4" Diameter x 5/8" Thick
20" Diameter x 3/4" Thick
Flywheel Weight
53 Lbs
80 Lbs
Chipper Knife Tip
Speed
128 mph
144 mph
Wheel Size
4.10/3.50-6 Pneu. (Standard)
4.80/4.00-8 Pneu. (Highway Models)
4.10/3.50-6 Pneu. (Standard)
4.80/4.00-8 Pneu. (Highway Models)
Axle
3/4" Diameter (Standard)
1" Diameter w/Welded Angle (Highway
Accessory)
3/4" Diameter (Standard)
1" Diameter w/Welded Angle (Highway
Accessory)
Hopper Material
10 GA Neck, 16 GA Hopper, Steel
10 GA Neck, 16 GA Hopper, Steel
Frame Material
10 GA Steel, 2”x2” Structural Angle
10 GA Steel, 2”x2” Structural Angle
Hopper Opening
at Top
17" x 27"
19" x 30-1/2"
Assembly
Parts supplied in Shipping Container:
• Gravity Self-Feeding Wood Chipper
• Hopper Assembly
• Tow Bar
• Extended Top-Discharge Chute (if ordered, see Chapter 6 “Chipper
Accessories”)
• Parts Box containing (Figure 2):
− Discharge Chute
− Front Tongue Bracket, Rear Tongue Bracket, Hitch Plate
− Safety Glasses, Gloves, and Hearing Protection
− Safety & Operation Instructions Manual
− Engine Owner’s Manual
− Hardware Package (Figure 3 and Table on next page)
− Warranty Card and Brochure
Figure 2
10 MACKISSIC GRAVITY SELF-FEEDING WOOD CHIPPER
Owner’s
Manual
Brochure
Discharge
Chute
Gloves
Bolt Bag
Warranty
Card
Engine
Manual
Hearing
Protection
Safety
Glasses