Safety & Operating Instructions

Clevis Pin
Connecting the Chipper to your Tractor
1. Lift the Chipper Tow Bar onto the Tractor Hitch and install the Hitch Pin
and Hitch Clip to secure it (Figure 27).
2. Pull the Hitch Clip from the Pin and pull the Pin from the Support Leg and
Tow Bar (Figure 28).
3. Rotate the Support Leg to the up (transport) position, align the holes in the
Tow Bar and Leg, reinstall the Pin and secure with the Hitch Clip (Figure 29).
Figure 27
Tow Hitch
Assembly
Hitch Clip
Avoid death or serious injury. Do not exceed 10 mph when towing the Yard-
Tow model. Never tow the Standard model over roads.
Figure 28
Tow Bar
Connecting the Chipper to your Vehicle – Highway Kit
1. Pull the latch assembly on the Tow Hitch Assembly up and into the
open position. Position the hitch coupler of the Chipper over and onto
the tow vehicle’s tow ball (must be a 2" tow ball) (Figure 30).
2. Pull the Hitch Clip from the Pin and pull the Pin from the Support Leg
and Tow Bar (Figure 28).
3. Rotate the Support Leg to the up (transport) position, align the holes in
the Tow Bar and Leg, reinstall the Pin and secure with the Hitch Clip
(Figure 29).
4. Close the Latch Assembly on the Tow Hitch Assembly to lock it onto
the Tow Ball (Figure 31). Attach the towing Safety Chains to the tow vehicle
ensuring there is enough slack for turning.
5. Insert the Locking Pin into the hole in the Latch Assembly.
Pin w/Hitch
Clip
Support Leg
Figure 29
Figure 30
Figure 31
Tow
Hitch
Assembly
Latch
Assembly
2" Tow Ball
Tow Bar
Pin w/Hitch
Clip
Support Leg
Latch
Assembly
Tow
Hitch
Assembly
Safety
Chains
Clevis Pin
Hitch Clip
Tow Hitch
Assembly
Tow Bar
Pin w/Hitch
Clip
Support Leg
Pin w/Hitch
Clip
Support Leg
Tow
Hitch
Assembly
2” Tow Ball
Latch
Assembly
Tow
Hitch
Assembly
Safety
Chains
22 MACKISSIC GRAVITY SELF-FEEDING WOOD CHIPPER