Safety & Operating Instructions

Chapter 1: General Safety Rules



Read this safety & operating manual before you use the MACKISSIC GRAVITY SELF FEEDING CHIPPER. Become

familiar with the

operation and service recommendations to ensure the best performance from your machine.

 Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for rope, wire, etc., and

remove these objects before chipping. Inserting these objects into the chipper hopper could damage the machine

and/or cause injury.

 This is a high-powered machine, with moving parts operating with high energy at high speeds. You must use proper

clothing and safety gear when operating this machine to prevent or minimize the risk of severe injury. This machine

can crush, grind, cut, and sever parts of your body if they enter the inlet or discharge area of your chipper.

Labels

Your MACKISSIC GRAVITY SELF FEEDING CHIPPER carries prominent labels as reminders for its proper and safe use.

Shown below are copies of all the safety and operation labels that appear on the equipment. Take a moment to study them

and make a note of their

location on your MACKISSIC GRAVITY SELF FEEDING CHIPPER as you assemble and before you

operate the unit. Replace damaged or missing

safety and operation labels immediately.

930-0002

930-0011

930-0014

930-0009