Safety & Operating Instructions

5
4
6
Chapter 5: Vacuum Kit Accessory #805-0129
Shut down the engine, remove the spark plug wire and wait 5 minutes for parts to cool before performing before installing the
Vacuum Kit.
3
6
4
1
2
Tools Needed:
• 5/16" Wrench
• 7/16" Wrench
• Short Flat Head Screwdriver
• Wire Cutters
• Utility Knife
1. Cut the Tape on the Box Flaps with a Utility Knife.
2. Remove the parts from the Box and lay them out on a flat clean area.
Shipping Box Contents (Figure 32 and Table Below)
ITEM#
DESCRIPTION
1
Hose, 6" Dia. X 8' Long
2
Adapter, Vacuum
3
Snout, Pick-up
4
Poly Bag
5
Cable Tie, 32"
6
Handle
Poly Bag Contents (Figure 33 and Table Below)
3
Compare the contents of the Shipping Box and Poly with the “Contents” lists
above. If you have any questions please contact us at www.MacKissic.com or
call 1-800-348-1117 for assistance.
NOTE: Assembly should be done on a clean, level surface.
3. Unscrew the x4 Nylon Locknuts and remove the Vacuum Snout from the
machine (Figure 24).
1
5
2
ITEM#
DESCRIPTION
1
Tether, Wire
2
Clamp, Hose, 6-1/8"
3
Grip, Handle
4
Guide, Cable
5
Screw, Machine, Rd Hd, 1/4-20 x
6
Nut, Nylon Lock, 1/4-20
5/16-18
Nylocks
Vacuum
Snout
Figure 22
Figure 23
Figure 24
CONTACT US AT www.MacKissic.com 19