Safety & Operating Instructions

www.MacKissic.com

Chapter 1: General Safety Rules

•

Read this Safety & Operating Manual before you use the 3-Point Hitch MIGHTY MAC GRAVITY SELF-FEEDING Chipper.

Become familiar with the

operation and service recommendations to ensure the best performance from your machine.

•

Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for Rope, Wire, ECT., and

remove these objects before chipping. Inserting these objects into the chipper hopper could damage the machine and/or

cause injury.

•

This is a high-powered machine, with moving parts operating with high energy at high speeds. You must use proper clothing

and safety gear when operating this machine to prevent or minimize the risk of severe injury. This machine can crush, grind,

cut and sever parts of your body it they enter the inlet or discharge area of your chipper.

Labels

Your 3-Point Hitch MIGHTY MAC GRAVITY SELF-FEEDING Chipper carries prominent labels as reminders for its proper and

safe use. Shown below

are copies of all the safety and operation labels that appear on the equipment. Take a moment to

study them and make a note of their location on your 3-Point Hitch MIGHTY MAC GRAVITY SELF-FEEDING Chipper as

you assemble and before you operate the unit. Replace damaged or missing safety and operation labels immediately.

930-0002

930-0011

930-0023

930-0010