Safety & Operating Instructions

3-POINT HITCH Mighty Mac Gravity Self-Feeding CHIPPER
28
Figure 42
File this
edge flat
Front View
End View
Wear Plate Sharpening
The Wear Plate edges become rounded and chipped during use and must be
squared off to ensure efficient operation.
Tools Needed:
• Flat File
Secure the Wear Plate in a vise.
File the edge of the Wear Plate to take out any nicks and to square
rounded edges (Figure 43).
NOTE: If the Wear Plate is filed enough times that the proper gap
between the Knife and Wear Plate cannot be set with the Gap Gauge,
you will need to replace the Wear Plate.