Operating instructions/Installation instructions
Table Of Contents
- Contents
- Help protect our environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Environmentally friendly washing
- Before using for the first time
- Removing the protective film and stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching on the washing machine
- 1. Setting the display text
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the shipping struts
- 5. Commissioning TwinDos
- 6. Starting the calibration program
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Selecting program settings
- 4. Loading the washing machine
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Favorite programs
- Washing assistant
- Timer
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Detergents and care products
Timer
60
The timer can be used to set the time
you wish a program to finish or start at.
The program start can be delayed by up
to 24hours.
Setting the timer
Touch the Timersensor button.
Select the Finish at or Start at option.
Set the hours and the minutes and
confirm your entry with the OKsensor
button.
Changing the timer
The selected times for the timer can be
changed before the program starts.
Touch the or sensor button.
Change the specified time and
confirm with the OKsensor button.
Deleting the timer
The selected time for the timer can be
deleted before the program starts.
Touch the or sensor button.
The selected time for the timer appears
in the display.
Touch the Deletesensor button.
Confirm with the OKsensor button.
The selected time for the timer is now
deleted.
Starting the timer
Touch the Start/Stopsensor button.
The door will lock and the time until the
program starts will appear in the
display.
After the program has started, the
selected time can only be changed or
canceled by interrupting the program.
The program can be started
immediately at any time.
Touch the Start immediatelysensor
button.