Operating instructions/Installation instructions
Table Of Contents
- Contents
- Help protect our environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Environmentally friendly washing
- Before using for the first time
- Removing the protective film and stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching on the washing machine
- 1. Setting the display text
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the shipping struts
- 5. Commissioning TwinDos
- 6. Starting the calibration program
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Selecting program settings
- 4. Loading the washing machine
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Favorite programs
- Washing assistant
- Timer
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Detergents and care products
Favorite programs
58
Creating Favorites
You can save your own customized
wash programs under names of your
choice.
Option 1
The main menu must be visible in the
display. Touch the Favoritessensor
button.
The display will change to show the
Favorites menu.
Touch the Createsensor button.
The display will change to the Create
Favoritemenu.
Select the program you want to use.
Select all the program settings you
want.
Then select Save.
Enter a name.
Option 2
You can save a program which has
been selected as a Favorite program
before you start it.
Before the program starts, touch the
Savesensor button.
Enter a name.
If 12 Favorites have already been
saved, the Create or Savesensor
button will not be visible. Delete an
existing Favorite if you wish to create a
new one.
Entering a name
It is best to select short names.
Tap the letters or characters you
want.
Confirm with the Savesensor button.
The wash program will then be saved to
the Favorites program list.
Changing a Favorite program
You can rename, delete, or move a
Favorite program.
Select the Favoritessensor button
from the main menu.
Touch the Favorite program that you
wish to change until the context
menu opens.
Select Rename, Delete, or Move.