Operating instructions/Installation instructions

Spin cycle
41
Final spin speed in the wash
program
When a program is selected, the
optimum spin speed for the wash
program is always shown in the display.
A faster spin speed can be selected for
certain wash programs.
The highest selectable spin speed is
indicated in the table.
Omitting the final spin (Rinse hold)
 Select the Rinse holdextra option.
If Rinse hold is selected, the laundry
remains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be
removed from the drum immediately
after the end of the program.
Ending a program with a spin cycle
The wash program is set to the
optimum spin speed. You can change
the spin speed.
 Touch the Change spin speedsensor
button.
 Select the spin speed you want.
 Touch the Start/Stopsensor button to
start the final spin.
Ending a program without a spin
cycle
 Touch the Change spin speedsensor
button.
 Select Spin speed 0rpm (no spin).
 Touch the Start/Stopsensor button.
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Omitting the rinse-spin and final spin
 Touch the Spin speedsensor button.
 Select the 0 rpm setting.
After the last rinse cycle, the water will
be pumped away and the anti-crease
phase will switch on.
An extra rinse cycle is carried out with
this setting for certain wash programs.