Operating instructions/Installation instructions
Table Of Contents
- Contents
- Help protect our environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Environmentally friendly washing
- Before using for the first time
- Removing the protective film and stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching on the washing machine
- 1. Setting the display text
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the shipping struts
- 5. Commissioning TwinDos
- 6. Starting the calibration program
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Selecting program settings
- 4. Loading the washing machine
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Favorite programs
- Washing assistant
- Timer
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Detergents and care products
6. Starting a program
38
Starting a program
The program can be started when the
Start/Stopsensor button is flashing on
and off.
Touch the Start/Stopsensor button.
The door will lock and the wash
program will start.
The program status will appear in the
display.
11:02
Normal
Status
Time left
h1:57
Main wash
Add laundry
The washing machine will keep you
updated on the program status and the
time remaining for the program to run.
If a delay-start period has been
selected, this will count down in the
display until the program starts.
The drum lighting switches off once the
program has started.
Energy savings
After 10minutes, the indicators dim.
The Start/Stop sensor button will light
up, flashing.
You can reactivate the indicators:
Touch the Start/Stop sensor button
(this does not have any effect on a
running program).
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time.
Touch the Add laundrysensor button.
The following appears in the display:
Please wait
The program will stop and the door will
unlock.
The following appears in the display:
11:02
Normal
Status
Add laundry
The door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Stopsensor button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 130°F
(55°C).
- The water inside the drum is above a
certain level.