Operating instructions/Installation instructions
Table Of Contents
- Contents
- Help protect our environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Environmentally friendly washing
- Before using for the first time
- Removing the protective film and stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching on the washing machine
- 1. Setting the display text
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the shipping struts
- 5. Commissioning TwinDos
- 6. Starting the calibration program
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Selecting program settings
- 4. Loading the washing machine
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Favorite programs
- Washing assistant
- Timer
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Detergents and care products
Operating the washing machine
15
Setting numerical values
You can set numerical values in some
menus.
12
11 59
10 58
01 01
02 02
Clock display
OK
pm
00
Enter the numbers by swiping upward
or downward. Place your finger on the
number that you want to change and
move your finger in the direction you
want. Touch the OKsensor button to
accept the set numerical value.
Tip: Briefly touching the numbers will
bring up the numerical keypad. Once a
valid number has been entered, the
OKsensor button will be highlighted
green.
Pull-down menu
The pull-down menu can be used to
display information, e.g., about a wash
program.
11:02
2:15
Normal
h
Overview
Temperature Spin speed
TwinDos Extras
not selectednot selected
Timer Save
Warm
Maximum
Touch the top edge of the screen in the
middle and drag down with your finger.
Help display
Help appears along the bottom line of
the display in the main menu and the
Programs menu.
Touch the Helpsensor button to
display the text.
Touch the Closesensor button to
return to the previous screen.
Exiting a menu
Tap the sensor button to return to
the previous screen.
Entries made before this which have not
been confirmed withOK will not be
saved.