Operating instructions/Installation instructions
Table Of Contents
- Contents
- Help protect our environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Environmentally friendly washing
- Before using for the first time
- Removing the protective film and stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching on the washing machine
- 1. Setting the display text
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the shipping struts
- 5. Commissioning TwinDos
- 6. Starting the calibration program
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Selecting program settings
- 4. Loading the washing machine
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Favorite programs
- Washing assistant
- Timer
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Detergents and care products
Settings
106
Appliance parameters
Legal Information
Open Source Licenses
You can view information here.
Copyrights and licenses for operator
and control software
Miele uses their own and third party
software which is not subject to any so-
called open source license for the
operation and control of the device/
appliance. This software/these software
components are protected by
copyright. The copyright powers of
Miele and third parties have to be
respected.
Furthermore, this device/appliance
contains software components which
are distributed under open source
license conditions. Please refer to the
menu item Settings| Device parameters|
Legal information| Open source licenses in
the device/appliance for the Open
Source components contained therein,
together with the corresponding
copyright notices, copies of the
licensing conditions valid at the time,
and any further information. The liability
and warranty provisions of the open
source licensing conditions as stated
therein apply only in relation to the
respective rights holders.
Copyrights and licenses for the
communication module
For the purpose of operating and
controlling the communication module,
Miele uses proprietary or third-party
software that is not covered by open
source licensing terms. This software/
these software components are
protected by copyright. The copyrights
held by Miele and third parties must be
respected.
This communication module contains
software components which are
distributed under open source license
conditions. The open source
components contained in the appliance
along with the corresponding copyright
notices, copies of the licensing terms
valid at the time, and any additional
information can be accessed locally via
http://<IP address>/Licenses. The
liability and warranty arrangements for
the open source licenses displayed in
this location only apply in relation to the
respective rights holders.