Operating instructions/Installation instructions

Settings
104
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier’s
energy costs are most economical.
Activating SmartGrid gives the
Timersensor button a new function.
Use the Timer sensor button to set
SmartStart. The washing machine will
then start within the timeframe specified
by you when it receives a signal from
your energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see “Delay Start”).
SmartGrid is deactivated as standard.
Remote Control
The Remote control setting is only
visible if the Miele@home setting is set
up and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it
remotely. You can also control it
remotely via the MobileStartprogram.
You can switch off the Remote control
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the program to be
canceled.
Use the Timer sensor button to set a
timeframe within which you want to
start the washing machine and the
timer (see “Timer”).
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.