Operating instructions/Installation instructions

Settings
98
Brightness
You can set the brightness of the
display, the sensor buttons, and the
dimmed sensor buttons.
Options
- Display
Controls the brightness of the
display.
–       (dark)
–       (light) (default setting)
- Buttons active
Controls the brightness of the
activated sensor buttons.
–       (dark)
–       (factory default)
–       (light)
- Buttons inactive
Controls the brightness of the sensor
buttons that can be activated.
–       (dark)
–       (factory default)
–       (light)
Tip: Ensure that there is a big difference
in brightness between the activated and
dimmed sensor buttons. A big
difference in brightness makes it easier
to operate the appliance.
Display switch-off
The display and the sensor button
lighting is switched off to save energy.
The Start/Add laundrysensor button
flashes slowly.
Options
- On(factory default)
The lighting switches off after
10minutes.
- On (not crnt prog)
The lighting remains switched on
throughout the program. The lighting
switches off 10minutes after the
program has ended.
- Off
The lighting remains switched on.
Program info
You can select the information that will
be displayed temporarily once a
program has been selected in the
display.
Options
- Program name
The program name is shown in the
display for several seconds.
- Prog. & Max load (factory default)
The program name and the maximum
load are shown in the display for
several seconds.
- Off
Directly after the program has been
selected, the standard display is
shown with temperature, spin speed,
and program duration.