Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Detergents and care products
Settings
97
Code
The PIN code prevents the washing
machine being used without your
knowledge.
Options
- Activate
When the PIN code has been
activated, you have to enter it after
switching the washing machine on.
Otherwise, the washing machine
cannot be operated.
The factory default PIN code is 125.
- Change
However, you can set a different,
three-digit PIN code.
Make a note of the new PIN
code. If you forget the code, the
washing machine will need to be
unlocked by Miele Service.
- Deactivate
The washing machine is to be
operated again without entering the
PIN code. This only appears if the
PIN code has been activated
previously.
Unit
The temperature and spin speed
values can be displayed in different
ways.
Options
- Clear text (factory default)
The values are displayed as words.
- °C + rpm
The temperatures are displayed as
figures in °C.
- °F + rpm
The temperatures are displayed as
figures in °F.