Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Detergents and care products
Settings
95
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language acts
as a guide in case a language which is
not understood has been set.
The language selected is saved to
memory.
TwinDos
You can set the type of detergent and
dispensing quantities and check the
fill level of the UltraPhase1 and
UltraPhase2 cartridges.
Change dosage
The set values for dispensing
UltraPhase1 and UltraPhase2
detergent can be checked and
corrected.
Check level
The level is displayed with a bar chart.
The display only works correctly when
the following conditions are met:
1. New (full) cartridges are used.
2. The cartridges must not be removed
from the washing machine in the
interim period.
Tip: The level can be corrected via the
Miele@mobile app.
Select detergent
You can either use UltraPhase1 and
UltraPhase2, or switch TwinDos
dispensing off.
Use the No agent setting to switch
TwinDos dispensing off.
Degree of soiling
You can specify the degree of soiling
that is pre-set for the sensor
button.
Options:
- Light
- Normal(factory default)
- Heavy
Buzzer volume
The buzzer can be set to be louder or
quieter.
Options
- (quiet)
- (loud) (factory default)