Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Detergents and care products
6. Starting a program
38
Touch the flashingStart/Add laundry
sensor button.
The door will lock and the wash
program will start.
The program status will appear in the
display.
The washing machine will keep you
updated on the program status and the
time remaining for the program to run.
If a delay-start period has been
selected, this will appear in the display.
Energy savings
After 10minutes, the indicators dim.
The Start/Add laundrysensor button
flashes.
You can reactivate the indicators:
Touch theStart/Add laundrysensor
button (this does not have any effect
on a program that is running).
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated in the display.
Touch the Start/Add laundrysensor
button.
The following appears in the display:
Please wait
Wait until the following display lights
up:
Door can be opened
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Add laundrysensor
button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 130°F
(55°C).
- The water inside the drum is above a
certain level.