Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Consumption
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Detergents and care products
5. Adding detergent
31
There are several options for adding
detergent to the washing machine.
TwinDos
The washing machine is equipped with
the TwinDos system.
TwinDos has to be activated as
described in “Before using for the first
time”.
The TwinDos system can only be
operated with the Miele UltraPhase1
and UltraPhase2 Detergents.
How UltraPhase1 and UltraPhase2
work
UltraPhase1 is a liquid detergent which
dissolves dirt and removes the most
common stains. UltraPhase2 is a
bleaching agent and removes stubborn
stains. For the best washing result,
these two agents are dispensed at
separate times during the washing
process. UltraPhase1 and UltraPhase2
clean white and colored textiles
thoroughly. UltraPhase1 and
UltraPhase2 single use cartridges are
available to order from your Miele
dealer or via Miele online store.
Activating TwinDos dispensing
TwinDos dispensing is automatically
activated on all programs in which
dispensing is possible.
Tip: The detergent dispensing
quantities are pre-set. If too much foam
builds up, the dispensing quantity for
UltraPhase1 and UltraPhase2 can be
reduced via More programs/ TwinDos.
Changing TwinDos dispensing
You can change the suggested color
composition of the laundry.
Touch the Whites or Colorssensor
button.
Deactivating TwinDos dispensing
Touch the TwinDossensor button.
The sensor button is only dimly lit and
dispensing is deactivated.
Using other methods to remove
stains
If you use additional methods of stain
removal, you have the following
options:
- Using the Booster cap and activating
the CapDosing
- Using chlorine bleach via the
compartment in the detergent
dispenser drawer.