Operating instructions/Installation instructions

Settings
102
Remote control
The Remote control setting is only
visible if the Miele@home setting is set
up and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the
MobileStartprogram.
You can switch off the Remote control
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the program to be
canceled.
Use the Delay Start button to set a time
until you want to start the washing
machine and start the Delay Start
function (see “Delay Start/SmartStart”).
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier’s
energy costs are most economical.
Activating SmartGrid gives the Delay
Start sensor button a new function. You
set the SmartGrid via the Delay Start
button. The washing machine will then
start within the timeframe specified by
you when it receives a signal from your
energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see “Delay Start”).
SmartGrid is deactivated as standard.