Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- _
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Copyrights and licenses for the communication module
- Detergents and care products
Extra options
50
Extra options can be selected
using the Optionssensor
button
Selecting extra options in the display
Touch the Optionssensor button.
The following will appear in the display:
No Extras
Touch the sensor buttons until
the extra option you want appears in
the display.
Confirm the extra option with the
OKsensor button.
The extra option has a next to it.
Deselecting an extra option
Touch the Optionssensor button.
The first extra option which can be
selected appears in the display.
Touch the sensor buttons until
No Extras appears in the display.
Confirm No Extras with the OKsensor
button.
The previously selected extra option is
now deselected.
Extra Gentle
Drum rotation and wash duration is
reduced. Lightly soiled textiles are
washed more gently.
ExtraRinse
An extra rinse can be activated to
achieve a more thorough wash result.
Soak
For heavily soiled and stained items
with protein stains.
A soak duration of between 30minutes
and 6hours in 30-minute increments
can be selected for the soak process.
See “Settings” for more information.
The factory default setting is
30minutes.
AllergyWash
This option should be used where high
standards of hygiene are required.
Energy consumption is increased to
lengthen temperature holding times and
water consumption is increased to
improve rinsing efficiency. The items
must be suitable for drying in a tumble
dryer and suitable for ironing
.