Operating instructions/Installation instructions

4. Selecting program settings
30
SmartStart
The SmartStart function lets you
define a time period during which your
washing machine will start
automatically. The start takes place via
a signal, e.g., from your energy
supplier, that indicates that the
electricity rate is particularly
economical. Please check with your
local utility provider for availability.
This function is active when the
SmartGrid setting is switched on.
The time period can be defined
between 15minutes and 24hours.
During this period, the washing
machine waits for the signal from the
energy supplier. If no signal is sent
during the defined period, the washing
machine starts the wash program.
Setting the time period
If you have activated the SmartGrid
function in Settings, SmartStart in
instead of Start in will appear in the
display when you touch the sensor
button (see “Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for Delay
Start.
 Use the sensor buttons to enter
the hour and confirm your entry with
the OK sensor button.
The hour will be saved and the minute
number block will be highlighted.
 Use the sensor buttons to enter
the minutes and confirm your entry
with the OK sensor button.
 Press the Start/Add laundry sensor
button to start the wash program with
SmartStart.
The following will appear in the display:
SmartStart
OK




