Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- Fault message after a program has been interrupted
- Fault message after the end of the program
- Messages or faults affecting the TwinDos system
- Messages or faults affecting the TwinDos system
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Settings
- Calling up settings
- Selecting settings
- Changing a setting
- Closing the Settings menu
- _
- TwinDos
- Degree of soiling
- Buzzer volume
- Keypad tone
- Welcome tone
- Code
- Unit
- Brightness
- Display switch-off
- Program info
- Memory
- _
- Soak duration
- Gentle action
- Temp. reduction
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-Crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- _
- Copyrights and licenses for the communication module
- Detergents and care products
Before using for the first time
17
Switching on the washing
machine
Turn the program selector to the
Normal program.
The welcome tone will sound and the
welcome screen will light up.
The display will guide you through the
5steps of the initial commissioning.
1. Setting the display text
You will be asked to set the display
language. It is possible to change the
language at any time by setting the
program selector to Additional
programs in the Settings submenu.
english (US)
OK
Touch the sensor buttons until
the language you want appears in the
display.
Confirm your choice of language by
touching the OK sensor button.
2. Setting up Miele@home
The following message appears in the
display:
Miele@home
Confirm with OK.
The following message appears in the
display:
Set up now
To set up Miele@home now: touch
the OK sensor button.
To postpone setup: touch the
sensor button until the following
appears in the display: Set up later and
press the OKbutton to confirm.
The following selection options appear
in the display:
1. Connect via WPS
2. Connect via App
Select the required connection type.
You will then be guided by the display
and the Miele app.