Operating instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr.
Contents Warning and Safety instructions ......................................................................... 5 Operating the washing machine ........................................................................ 12 Control panel ......................................................................................................... 12 How the control panel works ................................................................................ 13 Caring for the environment ...........................
Contents Changing the programme sequence ................................................................. 39 Changing the programme ..................................................................................... 39 Cancelling a programme ....................................................................................... 39 Garment care label symbols............................................................................... 40 Detergent .........................................................
Contents Levelling the machine............................................................................................ Screwing out and adjusting the feet................................................................. Installing under a continuous worktop ............................................................. Washer and dryer stack ................................................................................... The Miele water protection system ...............................................
Warning and Safety instructions This washing machine complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the washing machine. They contain important information on safety, installation, use and maintenance of the appliance. This prevents both personal injury and damage to the washing machine.
Warning and Safety instructions This washing machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety. Safety with children Young children must not be allowed to use this appliance.
Warning and Safety instructions Reliable and safe operation of this washing machine can only be assured if it has been connected to the mains electricity supply. The electrical safety of this washing machine can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations.
Warning and Safety instructions If the connection cable is faulty, it must only be replaced by a Miele approved service technician to protect the user from danger. In the event of a fault or for cleaning purposes, the washing machine is only completely isolated from the electricity supply when: – it is switched off at the wall socket and the plug is withdrawn, or – it is switched off at the mains circuit breaker. The machine must only be connected to the on-site water supply using a new hose kit.
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. Before using the machine for the first time, check that the transit bars at the rear of the machine have been removed (see “Installation - Removing the transit bars”).
Warning and Safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaler for washing machines which is available to order online at shop.miele.com (depending on country) or from Miele. Strictly observe the instructions on the packaging.
Warning and Safety instructions Accessories Only use genuine Miele spare parts and accessories with this appliance. If spare parts or accessories from other manufacturers are used, this will invalidate the warranty, and Miele cannot accept liability. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Control panel The control panel consists of a time display and various sensor controls. The individual sensors are explained in the following. b Sensor controls – temperature for selecting the temperature. c Sensor controls – spin speeds for selecting the spin speed. d Sensor controls for Extras You can supplement wash programmes with Extras. If a wash programme has been selected, the sensor controls for the possible Extras light up dimly.
Operating the washing machine g Time display After the programme has started, the programme duration will appear in the display in hours and minutes. When Delay start is being used, the programme duration will appear after the Delay start time has elapsed. h sensor controls The Delay start time selected will appear in the time display. After the programme has started, the Delay start time will begin to count down.
Caring for the environment Disposal of the packing material Disposing of your old appliance The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Before using for the first time Damage resulting from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious damage to property. See “Installation”. Removing the protective foil and stickers Remove: – the protective foil from the door – any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door. Shut the door with a gentle swing.
Before using for the first time Running the first programme Turn on the tap. Turn the programme selector to the Cottons position. The washing machine is now switched on and in the control panel the temperature 60°C lights up. Touch the Start/Add laundry sensor. The programme will start. After 10 minutes, the indicators dim, except for the Start/Add laundry sensor. Opening the door at the end of the programme The door remains locked during the Anti-crease phase.
Washing environmentally and economically Energy and water consumption Detergent consumption – To get the most out of your machine, load the maximum dry load for the programme you are using. The energy and water consumption will be the lowest in relation to the size of the load. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – When smaller amounts of laundry are washed, the Auto load control system will reduce the amount of water and energy used.
1. Preparing the laundry Damage due to solvent-based cleaning agents. Cleaning agents containing benzine, stain remover, etc., can damage plastic parts. When pre-treating garments, make sure that any plastic parts (e.g. buttons) do not come into contact with cleaning agent. Risk of explosion due to solvent Empty all pockets. Damage due to foreign objects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine.
2. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creases. Unfold the laundry and load loosely in the drum.
3. Selecting a programme Programme selection The washing machine is switched on by turning the programme selector to a wash programme. Selecting the temperature and spin speed The wash programme's pre-set temperature and spin speed light up brightly. The choice of temperatures and spin speeds selectable for the wash programme light up dimly. The temperatures reached in the washing machine may differ from the selected temperatures.
3. Selecting a programme Selecting Extras The selection of Extras available for the wash programme lights up dimly. Touch the sensor for the Extra you want. It then lights up brightly. Useful tip: You can select multiple Extras for a wash programme. Please refer to “Extras” for more information.
4. Adding detergent Detergent dispenser drawer Adding fabric softener Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Filling with detergent Add fabric softener or liquid starch to the compartment. Do not exceed the maximum level mark. Pull out the detergent drawer and add detergents to the compartments.
4. Adding detergent Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load). Too little detergent results in: – laundry not getting properly clean and with time it may become grey and hard to the touch. – a build-up of mould in the washing machine. – grease not being completely removed from the laundry.
4. Adding detergent CapDosing Inserting a capsule Three different types of capsule are available: Open the detergent dispenser drawer. = Fabric care (e.g. fabric softener) = Additives (e.g. booster) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. You can order the capsules online at shop.miele.com (depending on country) or from Miele (see the end of this booklet for contact details). Open the lid of the / compartment.
4. Adding detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. No additional fabric softener may be added to the compartment when using a capsule. Remove the empty capsule at the end of the programme. Close the lid and press it firmly shut. Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer.
5. Starting the programme Starting a programme Touch the flashing Start/Add laundry sensor. The door will lock and the programme will start. If a Delay start time has been selected, this counts down in the time display. At the end of the Delay start time or immediately after the programme has started (if no Delay start time has been selected), the programme duration will appear in the time display. Energy savings After 10 minutes, the indicators will dim. The Start/Add laundry sensor flashes slowly.
6. At the end of the programme Opening the door and removing the laundry The door remains locked during the Anti-crease phase. The control panel lights up for 10 minutes after the programme ends. The control panel then goes out and the Start/Add laundry sensor flashes. Items left in the drum could discolour other items in the next wash or become discoloured themselves. Check that all items have been removed from the drum. Turn the programme selector to the position.
Spinning Final spin speed in wash programmes Deselecting Rinse hold (final spin) When a programme is selected, the sensor for the optimum spin speed for that programme will be brightly lit up in the control panel. Touch the sensor (Rinse hold). A faster spin speed can be selected for certain wash programmes. The highest selectable spin speed is indicated in the table. Programme rpm The laundry is not spun after the final rinse and remains in the rinse water.
Delay start With Delay start you can delay the start of a programme from 30 minutes up to a maximum of 24 hours. This allows you to make use of night-time economy electricity rates, for example. Starting Delay start Touch the flashing Start/Add laundry sensor. The Delay start process starts and counts down in the time display. Selecting Delay start Delay start is not possible in the Drain/ Spin and Proofing programmes. Select the programme required. Touch the sensor.
Programme chart Cottons 60°C Max. load 8.0 kg Items Cottons, linens or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Notes With Cottons 60°C the actual wash temperature reached will be lower than 60°C although the wash performance is the same as with the standard Cottons 60°C programme. Cottons 40°C Max. load 8.0 kg Items Normally soiled cotton garments. Notes These settings are the most efficient in terms of energy and water consumption for washing cottons.
Programme chart Delicates Items Cold to 40°C Max. load 2.0 kg Delicate garments made from synthetic fibre, mixed fibre, rayon and viscose. Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc. Curtains specified as machine-washable by the manufacturer. Notes – On outdoor clothing, fasten zips or close Velcro fasteners and do not use fabric softener. – If required, these items can also be reproofed using the Proofing programme.
Programme chart QuickPowerWash 40°C – 60°C Max. load 4.0 kg Items Moderately soiled garments which are also suitable for washing in the Cottons programme. Notes A special saturation process and wash rhythm ensure that the laundry is cleaned particularly quickly and thoroughly. Express 20 Cold to 40°C Max. load 3.5 kg Items Cotton garments that have hardly been worn or are only very lightly soiled. Notes The Short Extra is activated automatically. ECO 40-60 Max. load 8.
Programme chart Drain/Spin Notes – – Drain only: Set spin speed to . – Make sure you select the appropriate spin speed. Separate rinse/Starch Items Max. load 8.0 kg – For rinsing hand-washed items. – For starching table cloths, serviettes and workwear. Notes – Reduce the spin speed for fabrics that crease easily. – Laundry that is to be starched should be washed but not treated with fabric softener. – Items will be rinsed very effectively with 2 rinses by activating the Water + Extra.
Extras You can use the Extras sensors to augment the wash programmes. Selecting Extras Extras are selected and deselected using the relevant sensors on the control panel. Water + The water level in the main wash and the rinse cycles is increased. A second rinse cycle is carried out in the Separate rinse/Starch programme. You can select other functions for the Water + sensor. These are described under “Programmable functions”. Pre-wash For laundry with large amounts of dirt, e.g. dust and sand.
Extras Short Water + Pre-wash Pre-ironing The following Extras can be selected in addition to the programme Cottons Cottons Minimum iron Delicates Woollens – – – – Shirts QuickPowerWash – – Express 20 – – – ECO 40-60 – – – – Proofing – – – – Separate rinse/Starch – – – = can be selected = activated automatically – = cannot be selected 35
Programme sequence Main wash Rinse Spin Water level Wash rhythm Water level Rinses Cottons 2-5 Cottons 2-5 Minimum iron 2-4 Delicates 2-4 Woollens 2 2,3 1,2,3 2,3 2,3 3 Shirts 3-4 QuickPowerWash 2 Express 20 1 ECO 40-60 3 Proofing – 1 Drain/Spin – – – – Separate rinse/Starch Please see the next page for a description of the symbols.
Programme sequence = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = handwash rhythm = carried out – Special features in the programme sequence Anti-crease: At the end of the programme the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: There is no Anti-crease phase in the Woollens programme. The door can be opened at any time during the Anti-crease phase.
Programme sequence PowerWash Activation PowerWash is a washing technique developed by Miele. It is activated in the following programmes: PowerWash is activated automatically in the programmes listed above.
Changing the programme sequence Changing the programme It is not possible to change the programme, the temperature, the spin speed or the selected Extras after the programme has started. Cancelling a programme You can cancel a programme at any time after it has started. Turn the programme selector to the position. Turn the programme selector to any position. Rotating bars ... ... or are shown in the time display. The water is pumped away and the door lock is released.
Garment care label symbols Washing Drying The figure quoted in the symbol is the maximum temperature at which the garment can be washed. The number of bars under the symbol indicates the level of agitation permitted. The number of dots indicates the drying temperature.
Detergent The correct detergent Refill packs of detergent All detergents produced for automatic front loading washing machines are suitable. Follow the manufacturer's instructions and dosage recommendations on the packaging. When purchasing detergent, buy refill packs wherever possible. This helps reduce the amount of waste packaging. The right amount to dispense will depend on the following: – The soiling level of the laundry. – The quantity of laundry. – The water hardness level.
Detergent Using fabric softener or starch separately Colour run and dye removers/ dyes Prepare the starch in accordance with the manufacturer's instructions on the packaging. Damage due to colour run/dye Useful tip: When adding fabric softener, activate the Water + Extra. Add fabric softener to the compartment or insert the appropriate capsule. Add liquid starch to the compartment and powder or viscous starch to the compartment. Select the Separate rinse/Starch programme.
Detergent Miele detergents Miele detergents have been specially designed for everyday use in Miele washing machines. See “Detergents and care products” for more information about these detergents.
Detergent The recommendations apply to the temperature ranges given in the Programme chart.
Cleaning and care External casing and fascia panel Risk of electric shock! Mains voltage is present when the washing machine is switched off. Disconnect the machine from the electricity supply before cleaning or maintenance. Risk of damage due to ingress of water. The pressure of a water jet can cause water to get into the washing machine, resulting in damage to components. Do not spray the washing machine with a water jet or high pressure hose.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times. Clean the fabric softener channel using a brush and warm water. Cleaning the detergent dispenser drawer housing 1. Remove the siphon from the compartment and clean under warm running water.
Cleaning and care Hygiene info (Cleaning the drum) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odours to build up in the washing machine. Use the Cottons 90 °C programme to clean the washing machine. This should be done at the latest when the indicator light comes on. Reassemble the filter and seal in the reverse order and reconnect the hose.
Problem solving guide With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call. Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
Problem solving guide The programme is cancelled and a fault indicator light lights up in the control panel. Problem Possible cause and remedy The fault indicator light lights up, and appear alternately in the time display and the buzzer sounds. The water outlet is blocked or restricted. The drain hose has been fixed too high. Clean the drain filter and the pump. The maximum drain height is 1 m.
Problem solving guide During the programme, a symbol appears in the time display Message Possible cause and remedy lights up The programme selector was moved to a different position after the programme had started. Turn the programme selector back to the original position. At the end of the programme, an indicator light lights up in the control panel Problem Possible cause and remedy The indicator light lights up. Excessive foam has built up during washing.
Problem solving guide General problems with the washing machine Problem Possible cause and remedy The washing machine smells. The indicator light was ignored. A programme using a temperature above 60°C has not been run for a long period of time. In order to prevent bacteria and unpleasant odours building up in the machine, run the Cottons 90°C programme using Miele IntenseClean or powder detergent. The detergent dispenser drawer was left closed after washing.
Problem solving guide General problems with the washing machine Problem Possible cause and remedy Fabric softener is not completely dispensed or too much water remains in the compartment. The siphon tube is not correctly positioned, or is clogged up. Clean the siphon (see “Cleaning and care Cleaning the detergent dispenser drawer”). At the end of the The small pipe in the detergent dispenser drawer programme there is still onto which the capsule is placed is blocked. liquid in the capsule.
Problem solving guide An unsatisfactory wash result Problem Possible cause and remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Use a general purpose powder detergent containing a bleaching agent. Use the appropriate capsule or add stain removers to the compartment. Never put stain removers and liquid detergent together in the dispenser drawer.
Problem solving guide The door will not open Problem Possible cause and remedy The door cannot be pulled open during a programme. The drum is locked during a programme. Follow the instructions in "5. Starting a programme – Adding laundry during a programme sequence". After the programme is For safety reasons, the door cannot be opened if the cancelled, flashing bars suds temperature is higher than 55°C. ......... appear Wait until the temperature in the drum has in the time display.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Open the drain pump access panel. Blocked drain outlet If the drain outlet is blocked, a larger quantity of water can remain in the washing machine. Slowly and carefully unscrew the filters until water runs out. Be careful not to release too much water at once.
Problem solving guide Opening the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry. Clean the filters thoroughly. Remove any foreign objects (e.g., buttons, coins etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Use a screwdriver to unlock the door of the machine as shown. Pull open the door.
Service Contact in case of fault Optional accessories In the event of any faults which you cannot remedy yourself, please contact Miele. Optional spare parts and accessories for this washing machine are available from Miele. Contact information for Miele can be found at the end of this booklet. Please quote the model and serial number of your appliance when contacting Miele. This information can be found on the data plate. Warranty The manufacturer's warranty for this appliance is 2 years.
*INSTALLATION* Installation Front view a Inlet hose (tested to withstand pressures up to 7000 kPa) e Detergent dispenser drawer b Electrical connection g Access to filters, pumps and emergency release c Flexible drain hose (with detachable swivel elbow) d Control panel 58 f Door h Four height-adjustable feet
*INSTALLATION* Installation Rear view a Drain hose b Transport clips for inlet and drain hoses and mains connection cable c Electrical connection d Protruding lid for holding when moving the machine e Inlet hose (tested to withstand pressures up to 7000 kPa) f Safety caps for transit bars g Transport clips for inlet and drain hoses and for storing transit bars when not in use 59
*INSTALLATION* Installation Installation surface A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The machine must be level and securely positioned. To avoid vibrations during spinning, the machine should not be installed on soft floor coverings. If installing on a wooden joist floor: Install the machine on a plywood base (at least 59 x 52 x 3 cm).
*INSTALLATION* Installation Using the spanner supplied, turn the left-hand transit bar anti-clockwise 90°, then Turn the right-hand transit bar clockwise 90°, then withdraw the transit bar. withdraw the transit bar.
*INSTALLATION* Installation Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. To avoid the risk of injury, the holes for the transit bars must be covered after the transit bars have been removed! Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. Risk of damage from incorrect Fit the stoppers onto the two holes. transport.
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. All four feet are screwed in when the appliance is delivered. Use a spirit level to check that the washing machine is standing level.
*INSTALLATION* Installation Installing under a continuous worktop Risk of electric shock due to exposed cables. There is a risk of coming into contact with live parts while the lid is removed. Do not remove the washing machine lid. Washer and dryer stack A Miele tumble dryer can be stacked with the washing machine. The appropriate “WTV” stacking kit* to match your tumble dryer is required. All parts marked * are available from Miele.
*INSTALLATION* Installation The Miele water protection system Electronic unit and washing machine housing The Miele water protection system protects all parts of the washing machine and surrounds from water damage. – Sump: Any leaking water is collected in a sump in the base of the machine. A float switches off the water inlet valves, preventing any more water from flowing into the machine and water in the suds container is pumped away.
*INSTALLATION* Installation Connection to the water supply Maintenance Health risk and risk of damage due to contaminated mains water. The quality of the water used must correspond to the drinking water specification of the country in which the washing machine is being operated. Always connect the washing machine to potable water. The washing machine must be connected to a mains water supply in accordance with current local and national safety regulations.
*INSTALLATION* Installation Drainage The suds are drained through a drain pump with a 1 m delivery head. For the water to drain freely, the hose must be installed free of kinks. If required, the hose can be extended to a length of up to 5 m. The necessary parts can be purchased from Miele. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted. Please contact Miele for advice. For a delivery head of 1.8 m the hose can be extended to a length of up to 2.
*INSTALLATION* Installation Electrical connection The washing machine is supplied with a mains cable with moulded plug ready for connection to a switched socket. The socket must be easily accessible after the machine has been installed. If the switch is not accessible after installation an additional means of disconnection must be provided for all poles. Risk of fire from overheating! Connecting the washing machine to a multi-socket plug adapter or to an extension lead can overload the cable.
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 96 kg Capacity 8 kg dry laundry Voltage See data plate Rated load See data plate Fuse rating See data plate Consumption data See “Consumption data” Water flow pressure minimum 100 kPa Water flow pressure maximum 1000 kPa Inlet hose length 1.60 m Drain hose length 1.50 m Connection cable length 2.
Consumption data Load Energy Water Duration Residual moisture °C kg kWh Litres h:min % 60 8.0 0.84 50 2:59 53 60 4.0 0.83 46 2:59 53 40 4.0 0.34 39 2:59 53 90 8.0 2.30 57 2:29 53 60 8.0 1.35 57 2:29 53 60 4.0 1.00 48 2:19 53 40 8.0 0.92 72 2:39 53 40 4.0 0.60 48 2:29 53 20 8.0 0.37 72 2:39 53 Minimum iron 30 3.5 0.32 47 1:59 30 Delicates 30 2.0 0.20 35 1:09 – Woollens 30 2.0 0.23 35 0:38 – QuickPowerWash 40 4.0 0.
Programmable functions The programmable functions are used to alter the machine's electronics to suit changing requirements. Programmable functions can be altered at any time. Programming is carried out in 8 steps (, , ... ) using sensors. Accessing the programming level Choosing and selecting programmable functions The number of the programmable function will appear in the display as and a number: e.g. .
Programmable functions Editing and saving the programmable function Exiting the programming level You can either switch a programmable function on or off or select different options. The settings have been changed. You can alter the settings again at any time. Touch the or sensor to switch the programmable function on/off or to select an option: Keypad tone Turn the programme selector to .
Programmable functions PIN Code The PIN code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Options = PIN code is switched off (factory default setting) = PIN code is switched on Using the washing machine with a PIN code The code is 125 and cannot be altered. Switch on the washing machine.
Programmable functions Memory The washing machine will save the last settings (temperature, spin speed and some of the Extras) selected for a programme after the programme has started. When the programme is chosen again, the saved settings will appear in the display. Options = Memory is switched off (factory default setting) If you require a longer pre-wash you can extend the pre-wash time.
Programmable functions Water plus You can determine the amount of water used if the Water + Extra is selected. Options = More water is used in the wash and rinse stages (factory default setting) = An extra rinse is carried out = The water level in the wash and rinse stages is increased and an extra rinse is carried out Maximum rinse level The water level in the rinse can be permanently set to the highest value.
Programmable functions Suds cooling When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. Anti-crease The Anti-crease function helps prevent creasing if laundry is not going to be removed immediately after the end of the programme. Suds cooling takes place when a Cottons programme with a temperature of 70°C or higher is selected.
Detergents and care products Detergent, fabric care, additives and machine care products are available for this machine. All the products have been designed for Miele appliances. These and many other useful products can be ordered via the internet at shop.miele.com (depending on country) or from Miele (see end of this booklet for contact details).
Detergents and care products Specialist detergents Caps CottonRepair These specialist detergents are available as convenient single-use capsules.
Detergents and care products Fabric care Machine care products These fabric care products are available as convenient single-use capsules.
Miele Australia Pty. Ltd.
WWD 320 en-AU, NZ M.-Nr.
