User Manual

Timer/SmartStart
79
SmartStart (only functional in
selected countries)
The SmartStart function lets you
define a time period during which your
washer-dryer will start automatically.
The machine will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity rate is
particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1 minute and 24hours. During this
period, the washer-dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the washer-dryer starts the programme.
Setting the timeframe
If you have activated SmartGrid in the
settings, SmartStart by and SmartFinish
by will appear in the display instead of
Start at and Finish at when you touch
the  Timersensor. See “Settings –
SmartGrid” for more information.
The procedure for setting this is the
same as for setting the time for the
timer.
 Set the time you want and confirm
with the OK sensor.
 Touch the Start/Stopsensor to start
the programme with SmartStart.
The selected programme will start
automatically, as soon as the energy
provider has sent the signal, or the
latest calculated start time has been
reached.
The procedure for changing or
deleting the SmartStart function is the
same as described in “Changing the
timer” and “Deleting the timer”.