User Manual

Drying
64
Adding laundry
Laundry can be added or removed if
Add laundry is illuminated in the display.
 Touch the Add laundrysensor.
The following will appear in the display:
Please wait
The programme will stop and the door
will unlock.
 Risk of burning when touching
hot laundry in the drum.
You could burn yourself.
 Open the door.
 Add or remove laundry.
 Close the door.
 Touch the Start/Stop sensor.
The programme will continue.
Exceptions to adding laundry
In some cases, e.g. during the cooling
phase or in the Proofing programme,
you cannot add laundry.
In exceptional cases, the door can be
opened while the programme is
running.
Please note:
Once a programme has started, the
washer-dryer cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a
programme, the machine will always
complete the programme cycle
assuming a full load.
6. End of the programme/
unloading laundry
At the end of the programme, the drum
continues to turn at intervals for up to
150 minutes. The door will lock and the
following will appear in the display:
Finish/Anti-crease and Unlock with "Start/
Stop".
 Touch the Start/Stopsensor.
The door will unlock.
If you unload the laundry during the
Anti-crease phase, heat can build up.
Spread the laundry out to cool it
down.
The door unlocks automatically at the
end of the Anti-crease phase.
 Pull open the door.
 Remove the laundry.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Remove all items from the drum.
Useful tip: See “After each washing or
drying programme”.