User Manual

Drying
63
4. Loading the drum
Opening the door
 Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with
laundry.
 Load the laundry loosely in the drum.
Overloading places a strain on the
textiles and affects drying results.
Observe the maximum loads listed in
the Programme chart.
Closing the door
 Make sure that no items are caught
between the door and the seal.
 Shut the door with a gentle swing.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt
during the drying programme and
cause damage to the machine and
the laundry.
These dispensing aids must be
removed from the laundry before
drying.
The mains water tap must be kept
open for drying.
Useful tip: The maximum load size for
the programme selected will appear in
the pull-down menu.
5. Starting the programme
The programme can be started when
the Start/Stop sensor is flashing on and
off.
 Touch the Start/Stop sensor.
The door will lock and the programme
will start.
The programme status will appear in
the display.
 11:02
1:39

Cottons
h
Drying
Drying
Time left
Add laundry


The washer-dryer will keep you updated
on the programme stage and the
remaining programme running time.
If a Timer period has been selected, this
will count down in the display until the
programme starts.
The drum lighting switches off once the
programme has started.
Saving energy
After 10 minutes, the indicators will dim.
The Start/Stop sensor flashes slowly.
You can reactivate the indicators:
 Touch the Start/Stopsensor (this
does not have any effect on a
programme that is running).