User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washer-dryer
- Before the first use
- _
- Removing the protective foil and advertising stickers
- Remove the detergent cartridges and the drain hose elbow from the drum
- Miele@home
- Switching the washer-dryer on
- 1. Setting the language
- 2. Setting up Miele@home
- 3. Setting the clock format
- 4. Removing the transit bars
- 5. Setting up TwinDos
- 6. Starting the calibration programme
- Environmentally friendly washing and drying
- Washing
- 1. Preparing the laundry
- 2. Selecting a programme
- 3. Selecting programme settings
- 4. Loading the drum
- 5. Adding detergent
- TwinDos
- Detergent dispenser drawer
- CapDosing
- 6. Starting the programme
- Saving energy
- Adding laundry - AddLoad
- 7. End of the programme/unloading laundry
- Spin cycle
- Programme chart
- Programme sequence
- Extras
- Detergent
- Drying
- Washing and Drying
- After each washing or drying programme
- Changing the programme sequence
- Favourite programmes
- Washing/Drying assistant
- Timer/SmartStart
- Cleaning and care
- Problem solving guide
- A programme cannot be started
- Fault messages after a programme has been cancelled
- Fault messages at the end of a programme
- Fault messages at the end of a programme
- Problems with TwinDos
- Problems with TwinDos
- General problems with the washer-dryer
- General problems with the washer-dryer
- General problems with the washer-dryer
- An unsatisfactory wash result
- Unsatisfactory drying result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Technical data
- Consumption data
- Garment care label symbols
- Settings
- Detergents and care products
Before the first use
24
Switching the washer-dryer on
Press the sensor.
The welcome screen will light up.
The display will guide you through the
6steps of the initial commissioning
process.
1. Setting the language
You will be asked to select the language
for the display. It is possible to change
the language at any time via the
Settings menu.
Language
OK
dansk
deutsch
english (AU)
english (CA)
english (GB)
english (US)
Scroll to the left or the right until the
language you want appears.
Touch the sensor for the required
language.
The selected language will be
highlighted in orange and the display
will change to the next setting.
2. Setting up Miele@home
Skip
Continue
Set up "Miele@home"?
To set up Miele@home now: touch
the Continue sensor.
Useful tip: To postpone set-up until
later: touch the Skip sensor. The
following message will appear in the
display:
It is possible to set up later in "Settings" /
"Miele@home"..
Confirm with the OKsensor.
Selecting a connection method
Via WPS
via App
Which connection method do you
want to use?
Select the connection method you
wish to use.
You will then be guided by the display
and the Miele App.