User Manual

Settings
120
The RemoteUpdate function is used for
updating the software in your washer-
dryer. If an update is available for your
washer-dryer, it will automatically
download it. Updates will not be
installed automatically. They must be
initiated manually.
If you do not install an update, you can
continue to use your washer-dryer in
the usual way. However, Miele
recommends installing updates.
Activating/Deactivating
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
A message will appear in your washer-
dryer display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
washer-dryer is switched on again, you
will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the washer-dryer
during an update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by a Miele service
technician.