User Manual

Settings
114
Controls / Display 
Language 
The display can be set to appear in
one of several different languages.
The flag after the word Language acts
as a guide in case a language which is
not understood is set.
The language selected is saved.
Code
The code prevents the washer-dryer
being used without your knowledge.
Options
- Activate
The factory default code is 125 and
can be activated. When the code has
been activated, you have to enter the
code after switching the washer-
dryer on. Otherwise the washer-dryer
cannot be operated.
- Deactivate
For using the washer-dryer without
entering the code. This only appears
if the code has been activated
previously.
- Change
You can enter any code.
If you forget the code, the washer-
dryer will have to be unlocked by a
Miele service technician.
Important! Make a note of your new
code.
Memory
The washer-dryer will save the last
settings selected for a programme
(temperature, spin speed and some of
the Extras) after the programme has
started.
The next time the programme is chosen
these saved settings will appear in the
display.
Factory default setting: Memory is
switched off.
Clock display
If the clock format has been set, the
time of day can be set.
Clock format
- 24 h clock (factory default setting)
- 12 h clock
Time
- The time can be set.
Volume
The volume for various sounds can be
changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of seven different
settings or switched off altogether.