Operation Manual

Installation and connection
96
 If the holes are not covered,
there is a risk of injury.
To avoid the risk of injury the holes
for the transit bars must be covered
after they have been removed.
 Plug the holes with the plastic caps
as illustrated.
 The washer-dryer must not be
moved without the transit bars in
place.
Keep the transit bars in a safe place.
They must be refitted if the washer-
dryer is moved again (e.g. when
moving house).
Re-fitting the transit bars
 Re-fitting is carried out by reversing
the procedure.
Installing under a continuous
worktop
Building under kits* must only be in-
stalled/dismantled by a suitably qual-
ified fitter in accordance with the in-
structions supplied.
– A special building under kit* with a
cover plate to replace the machine lid
is required. It must be fitted by a suit-
ably qualified fitter to ensure elec-
trical safety. N.B. If there is space to
push the washing machine under the
worktop without removing the lid, the
building under kit is not necessary.
Otherwise it is essential.
– Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the machine is in its final posi-
tion.
Fitting instructions are supplied with the
building-under kit.