Operation Manual

Settings
109
Language 
The display can be set to appear in
one of several different languages.
The flag  after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.
TwinDos
You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washer-dryer is pre-set as standard
for UltraPhase1 and UltraPhase2 for
hardness range II ().
The settings must be changed in the
electronics:
– for water hardness rangeI() and
water hardness rangeIII().
– when changing to a different deter-
gent or fabric conditioner. The
TwinDos containers (optional ac-
cessories) are required for this.
Dosage amounts for UltraPhase1 and
UltraPhase2
  
UltraPhase1 48 ml 60 ml 72 ml
UltraPhase2 36 ml 45 ml 54 ml
Adjusting the dosage amount
Detergent / amount

 Touch the OK sensor.
Compartment 1

 Touch the OK sensor.
Miele UltraPhase 1
 Touch the OK sensor.
Dosage - C. 1 ml60
 Use the  and  sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
 Set the dosage for UltraPhase 2
 Confirm the message with the
OKsensor.
Dosage - C. 2 ml45
 Use the  and  sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
The dosage amount has been adjusted.