Operation Manual

Before using for the first time
20
Start the calibration pro-
gramme
The following message will in the dis-
play:
Open  and run Cottons 90°C without
laundry.
Touch the sensor repeatedly until
you have read all the rows of text.
The OK sensor will light up.
Confirm the message with the
OKsensor.
It is important to calibrate the machine
to ensure optimum water and energy
usage, as well as optimum washing
and drying results.
To do this the Cottons 90°C pro-
gramme must be run without laundry
and without detergent.
No other programmes can be started
until calibration has been carried out.
Open the stopcock.
Turn the programme selector to Cot-
tons.
Do not change any other programme
settings.
1:55 90°C 1600
Press the Start/Stop button.
The calibration programme will start.
At the end of the programme the follow-
ing message will appear in the display:
Set-up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washer-dryer off with the
button.