Operating and Installation Instructions Washer W 4802 To prevent accidents and appliance damage, read these instructions before installation or use. en - US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Washing tips: . . . . . . . . . . . . . . . . . . .
Contents Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 A wash program cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS ,WARNING - To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Keep these operating instructions in a safe place and pass them on to any future user.
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ Do not install or use a washer with visible damage. ~ Before connecting the machine, ensure that the connection data on the data plate (fusing, voltage and frequency) match the mains electrical supply. If in doubt contact an electrician. ~ GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
IMPORTANT SAFETY INSTRUCTIONS Safety ~ Do not install or store this appliance where it will be exposed to the weather. ~ Do not install the washing machine in rooms where temperatures below freezing may occur. ~ Before using the washer for the first time, remove the shipping struts at the back of the appliance (see "Installation - Removing the shipping struts"). Failure to remove the shipping struts can damage the washer and surroundings during spinning. ~ During extended absences (e.g.
Guide to the washer Control panel a PROGRAMS buttons eto select a wash program. b OPTIONS buttons Special features to enhance a wash program. c TEMP button to select the wash temperature. d SPIN speed button to select the spin speed. e PC Indicator allows a service technician to check and update the wash programs. f STATUS indicators shows the current cycle of the wash program. g Buzzer button turns the buzzer on and off. h FAULT indicators indicate errors and shows the activated Child Lock.
Before using for the first time The appliance must be correctly installed and connected before the first use. Please see the "Installation instructions." This washing machine has undergone thorough testing in the factory, there may be some residual water in the drum from this process. Running a spin cycle before the first use is not possible for safety reasons. To activate the spin cycle, a wash program must be run without laundry and without detergent. ^ Turn on the water supply.
Before using for the first time Washing tips: Detergent use Energy and water consumption – Use the recommended amount of detergent. – Do not overload the washer. The energy and water consumption will be most energy efficient. – Bear in mind the soiling degree of the laundry. – With smaller loads in the programs "Normal, Sanitize, Extra White and Custom" the washer automatically adjusts the water use to conserve water and energy.
Using the washer 1. Prepare and sort the laundry Sort the laundry ^ Only wash items that are labeled machine washable by the manufacturer. Most garments have a fabric care label in the collar or side seam. ^ Sort the laundry by care label and color. General tips ^ Empty all pockets. ,Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.) can cause damage to clothes and the machine. Pre-treat stains ^ Tough stains (blood, egg, coffee, tea, etc.
Using the washer 2. Load the laundry ^ Open the drum door. ^ Load the laundry loosely into the drum. For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly. ^ Close the drum door. To prevent damage, make sure that there is no clothing caught between the drum door and the seal. ^ Close the drum door.
Using the washer 3. Select a program 4. Select a temperature and final spin speed The preselected temperature and/or spin speed can be adjusted if the program allows for it. See the "Program Guide". ^ Press the "PROGRAMS" button e or - until the desired program indicator lights. ^ Press the "TEMP" and "SPIN" button until the indicator of the desired setting lights.
Using the washer Program guide Temperature Final Spin Item / Tip Options: Extended, Pre-wash, Sensitive, Buzzer Normal Hot D Sanitize C Warm B Cold A Items made from cottons, linen or mixed fabrics. Max No Heat Important: Fill the drum only 3/4 of the way. Items need room to move otherwise they might get caught in the drum door seal.
Using the washer Temperature Final Spin Item / Tip Options: Sensitive, Buzzer Woolens Warm High Cold Med No Heat Slow Items made from washable wool and mixed woolens.
Using the washer Final spin speed Hold Program Normal Max Wrinkle-free High Sanitize Max ^ Select "Hold". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program. Extra White Max Delicates Med – Selecting / Starting the final spin Woolens High Express Max Sturdy High The washer is set by default to the maximum spin speed of the wash program.
Using the washer 5. Select an option Extended For laundry with normal to heavy soiling or stains. The main wash cycle time for the wash program will be extended. Pre-wash For heavily soiled laundry. For stubborn stains which are dried on. A pre-wash takes place and the wash time for the main wash is extended. ^ Select the desired Option with the respective button. Once an Option is selected the indicator lights. ^ See the Program Guide to find which Option is selectable for what program.
Using the washer 6. Add detergent Front loading washing machines require significantly less detergent than traditional top loaders. Closely follow the requirements of the detergent manufacturer. Use detergent according to the laundry soiling and water hardness. Light soiling No soiling or stains are visible. Normal soiling Some visible soiling or a few light stains. Heavy soiling Very visible soiling or stains. Use the "Pre-wash" function and add detergent in the Heavy soil compartment as described.
Using the washer ^ Add detergent to the desired compartments. – Main wash Detergent for the main wash – Heavy Soil Detergent for the pre-wash – Bleach Bleach used as described by the manufacturer; placed in the bleach compartment ^ Pull out the detergent dispenser drawer. – Softener Fabric softener or liquid starch ^ Add detergent to the Main Wash compartment at the beginning of each wash program.
Using the washer Detergents You can use all high efficiency detergents which are formulated for household washing machines. Closely follow the requirements of the detergent manufacturer.
Using the washer Fabric after care Bleach Fabric softener Makes fabrics feel softer and reduces static cling in the dryer. Mild liquid starch A synthetic starch wash that gives fabrics some stiffness. Starch Gives the fabrics stiffness and volume. ^ Pour bleach into the bleach compartment. During the Main Wash the bleach will be automatically rinsed from the compartment and added to the cycle. Dyes / Dye removers ^ Add the fabric softener or mild liquid starch to the "Softener" compartment.
Using the washer 7. Start the program 8. Activate the Child Lock (if desired) The Child Lock prevents a program from being canceled. ^ Press the flashing "Start" button. When pressing the "Start" button, do not press and hold the button. Only a brief tap is necessary. The washer shows the current cycle of the wash program under "STATUS". The drum door will be locked when the program starts. The drum light turns off after the program starts.
Using the washer 9. Program end ^ Open the drum door. ^ Remove the laundry. Check the drum for any missed pieces of laundry. Items inadvertently left in the washer may be damaged (e.g. shrink or discolor) during the next wash cycle. ^ Check the folds of the door seal for any small articles which may have been trapped. ^ Close the drum door. ^ Activate the Child Lock for safety reasons. ,Children, animals or foreign objects may find their way into the drum.
Using the washer Canceling a program Interrupting a program A program can be canceled any time after a program start. ^ Press the "Pause" button briefly. ^ Press the "Pause" button until the "STATUS" indicator "Drain/Spin" indicator lights. The wash water will be drained away. To add or remove laundry ^ Open the drum door. To select another program ^ Select a new program with the e buttons. The washer interrupts the program and unlocks the door. Continue: ^ Tap the "Start" button.
Using the washer Adding/removing laundry during a wash program The drum door cannot be opened if: – the water temperature is greater than 130°F (55°C). – the water level is too high. – the program has reached the "Final Spin". ^ Press briefly the "Pause" button. ^ Open the drum door. ^ Add or remove the piece of laundry. ^ Close the drum door. ^ Press the "Start" button. The program will continue automatically. 24 – The Child Lock function is activated.
Cleaning and care ,Before cleaning or maintenance, disconnect the power supply by unplugging the unit or manually "tripping" the circuit breaker. ,Do not hose the washer down. Cleaning the exterior and control panel Cleaning the drum To ensure that your machine remains clean and free of any soil build-up or odors, the washer comes equipped with a self-cleaning program for the drum and water lines. It is suggested to run this program approx. once a month.
Cleaning and care Cleaning the dispenser drawer Regularly remove any detergent residue. ^ Remove the lid from the bleach container and clean both parts thoroughly in warm water. ^ Re-attach the lid. ^ Pull the detergent drawer out until it stops, press down the release catch, and remove the drawer from the washer. ^ Remove the bleach compartment to clean it. 26 ^ Clean the "Heavy Soil" and "Main Wash" compartments with warm water. ^ Put the bleach container back in the "Main Wash" compartment.
Quick guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the washer.
Quick guide 1. Sort the laundry 3. Select a program ^ Empty all pockets. ^ Select the desired program. ^ Sort the laundry by fabric and color. The indicator of the selected program lights. ^ Pre-treat stains. 2. Load the laundry 4. Select a temperature and spin speed The preselected temperature and/or spin speed can be adjusted if the program allows so. ^ Open the drum door and load the laundry. ^ Close the drum door.
Quick guide 5. Select an Option 7. Start a program ^ Tap the flashing "Start" button. 8. Activate the Child Lock ^ Select the desired "OPTIONS". Press the upper button until the indicator/s of the desired option light/s. 6. Add detergent ^ Press the "OPTIONS" button until the "FAULT" indicator "Child Lock" lights. ^ Deactivate the Child Lock after the program has finished. 9. Unload the laundry ^ Open the drum door. ^ Add detergent in the respective compartments. ^ Remove the laundry.
Quick guide Program guide No in Sp ld Ho d gh x at He w Slo Me Hi Ma No ld Co Wa rm Wa ry Ve t Ho e iz nit Sa rm Normal Wrinkle-free Sanitize X X X X X X X X X X X Extra White X X X X X X X X X Woolens X X X Express X X X X X X X X X X Ex St Cu Delicates Sturdy Custom X Clean Machine X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Options X e hin X X ac X X nM X X ea X Buzzer m Sensitive
Cleaning and Care Siphon tube and channel Cleaning the detergent drawer niche 1. Remove the siphon tube from the "Softener" compartment and rinse under warm water. Also clean the pipe connected to the siphon tube. ^ Use a bottle brush to remove any detergent residue and lime deposits from the jets inside the detergent drawer. 2. Put the siphon tube back into place. ^ Slide the drawer back into place. ^ Clean the fabric softener channel with warm water and a brush.
Cleaning and Care Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. These filters should be checked and cleaned if necessary every 6 months. This may need to be done more frequently with some water supplies. ^ Turn off the water supply. ^ Unscrew the inlet hose from the valve by turning the connector counterclockwise using a wrench if necessary. ^ Remove the rubber seal, 1, from the connector.
Frequently asked questions ,Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine: A wash program cannot be started Issue Possible cause A "PROGRAMS" The washer has no indicator does not light power.
Frequently asked questions The program was canceled, the buzzer sounds and the "Start" button flashes. Issue Possible cause Solution – To turn off the fault message: Open the drum door or press and hold the "Pause/Hold to Cancel" button until the fault message goes out. The "FAULT" indicator – The drain is "Drain" lights. blocked. – The drain hose is too high. – Clean the drain filter and the drain pump. – The maximum drain pump height is 3 ft (1 m).
Frequently asked questions An error message is displayed at the end of a program. Issue Possible cause Solution – To turn off the fault message: Open the drum door or press and hold the "Pause/Hold to Cancel" button until the fault message goes out. The "FAULT" indicator The drain is blocked. Clean the drain filter and the "Drain" lights. drain pump. The "FAULT" indicator The water intake is "Intake" lights. blocked. Possible fault: Check if the water supply is open all the way.
Frequently asked questions General problems with the washer Problem Possible cause Remedy The washer shakes during spin cycles. The feet are not level and/or the nuts are not properly tightened. The pump is making unusual noises. This is not a fault. Lapping sounds at the beginning and end of the pump process are normal. Large residues of detergent remain in the dispenser drawer. The water pressure is too Clean the water inlet filter. low.
Frequently asked questions Unsatisfactory wash results Issue The laundry is not clean enough when using liquid detergent. Possible cause Solution Liquid detergents do not – Use powder detergents contain bleaching containing bleach. agents. Fruit, coffee and – Pre-treat stains tea stains may not be removed. Laundry has a gray – Not enough detergent – Add more detergent to sticky residue. was used to dissolve laundry with grease stains or use a liquid detergent. greasy deposits on heavily soiled laundry.
Frequently asked questions The drum door cannot be opened Possible cause Solution The door is locked during the wash cycles. Press the "Pause" button. The door lock opens. The Child Lock is activated. Deactivate the Child Lock as described in the chapter "Using the washer - Activate the Child Lock". Power failure Open the door as described on the following page. There is still water in the drum and the washer cannot drain the water. Clean the drain filter and drain pump.
Frequently asked questions Opening the drum door during a power failure or when the drain is blocked ,Pull the plug from the electrical outlet before cleaning the washer! If the drain is clogged there will be water in the machine (max. 9.25 gal [35 l]). ,Make sure the machine is turned off and the drum has stopped turning. A moving drum is dangerous. ^ Place a container under the drain tube. ^ Open the detergent dispenser drawer and remove the tool.
Frequently asked questions Once the flow of water stops: ,If the drain filter is not securely tightened water will leak out when the machine is used. Opening the drum door ,Make sure the machine is turned off and the drum has stopped turning. A moving drum is dangerous. ^ Pull out the detergent drawer. ^ Remove the drain filter. ^ Clean out any foreign objects or lint from the filter. ^ Insert a screw driver into the slot of the emergency opener and pull upwards. The door will now open.
After sales service Repairs MieleCare In the event of a fault which you cannot fix yourself, please contact the service number on the back of this manual. (only USA) When contacting the Service Department, please quote the model and serial number of your appliance. This information can be found on the data plate located at the door hinge. PC Update The indicator marked PC allows a technician to make use of new technology.
38
Installation Instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use.
Installation Front view a High pressure intake hose, red mark for hot water b High pressure intake hose, blue mark for cold water c Power cord d - g Flexible drain hose with detachable swivel elbow (drain options shown) 40 h Control panel i Detergent dispenser drawer and door opener in case of power failure j Drum door k Access panel to lint trap and drain pump l Four height-adjustable feet
Installation Rear view a Electrical connection f Drain hose b W-LAN communication module g Shipping struts c Rear access with grip for transport h Brackets for intake and drain hoses d Water intake hose cold water (blue stripes) e Water intake hose hot water (red stripes) 41
Installation Installation site For best performance front loading washers should be installed on the ground floor or basement of the building. A concrete or reinforced floor is the most suitable surface for the washer. These floors are less prone to vibration during the spin cycle. If the installation must be on a wooden joist floor: – the corner of a room where the stability of the floor is at its greatest is the best place to install the washer. – the machine must be leveled and securely positioned.
Installation Removing the shipping struts ^ Turn the left shipping strut counterclockwise 90°. ^ Turn the right shipping strut counterclockwise 90°. ^ Withdraw the two struts together with the support plate. ^ Cover the two holes with the provided plugs. ,Movement of the washer without the shipping struts in place should be kept to a minimum. The struts must be reinstalled before the machine is moved. The shipping struts should be stored in a safe place for future use.
Installation Leveling the washer To ensure smooth operation the washer must be level. Failure to level the machine can result in increased water and energy consumption, loud noises during the spin cycle or "walking" across the floor during use. ^ Loosen the locking ring, 2, with the supplied wrench. ^ Unscrew each of the four feet as much as necessary by turning both the foot, 1, and locking ring, 2, to the left. ^ Remove the support and stand the machine on its feet.
Plumbing The washing machine can be connected to a portable water supply. A non-return valve is not needed unless required by building code. The washing machine has ½" (13 mm) pressure hoses with 3/4" (19 mm) female hose thread connections. If there is no water hookup, contact a plumber to install a connection. Make sure that the sealing ring is seated properly on the hose connector. Replace the hose only with a genuine Miele hose, or with a hose able to withstand up to 145 psi (10 bar) pressure.
Plumbing Water connection Tips for a hot water connection ^ Connect the cold water intake hose (blue mark) to the cold water valve and the hot water intake hose (red mark) to the hot water valve. The hot water temperature from the hot water valve must not exceed 140°F (60°C); the ideal temperature is 130°F (55°C).
Plumbing Drainage The 5 ft (1.5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e.g. by tying the hose to the water faucet). 2. To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipe and secure it firmly. 3. To a floor drain: The machine is equipped with an air gap / anti-siphoning system so that no minimum drain height is required. ^ The machine drains using a pump with a maximum delivery height of 4 ft (1.2 m).
Electrical connection ELECTRICAL INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Help protect our environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children, as they pose a danger of suffocation. Disposal of an appliance Old appliances may contain materials that can be recycled.
50
51
Alteration rights reserved / 1810 M.-Nr. 07 830 400 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
