Operating instructions Washer W 1213 To prevent accidents and machine damage, read these instructions before installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the washer . . . . . . . . . . . . . . . . .
Contents Washer care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning the inlet hose filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning the filter in the inlet valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Frequently asked questions . . . . .
IMPORTANT SAFETY INSTRUCTIONS ,WARNING - To reduce the risk of fire, electric shock or injury to persons while using your appliance, follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
Guide to the washer Control panel a Program selection buttons eFor selecting a program. b Wash options Special features to enhance a wash program. c Temperature button For selecting the desired wash temperature. f Program sequence display Shows the currect cycle of the wash program. g "Buzzer" button h FAULT-indicators i "Delay Start" button For delaying the start of a program. d Spin speed button For selecting the desired spin speed.
Before using for the first time The appliance must be correctly installed and connected before the first use. Please see the "Installation instructions". For safety reasons, it is not possible to run a spin cycle before the first use. A program must be run without laundry and without detergent to flush out any residual water from the factory testing process, as well as to activate the spin cycle. Using detergent can cause sudsing and ball valve activation, resulting in the future maximum use of detergent.
Using the washer 1. Prepare and sort the laundry General tips ^ Empty all pockets. – Dark fabrics often bleed the first few times they are washed. They should be washed seperately several times before being included in a mixed load. ,Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.) can cause damage to clothes and the machine. ^ Sort the laundry. – Remove any lead weights or strips from curtains before washing.
Using the washer 2. Load the laundry 3. Select a program ^ Turn on the washer using the "On/Off" button. ^ Open the drum door using the "Door" button. ^ Load the laundry into the drum. For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly. Note: Overloading the washer will cause poor wash results and wrinkling. ^ Close the drum door.
Using the washer Program guide Temperatures Fabric care symbol Spin speed Normal Options: Extended, Heavy Soil, Soak, Sensitive Hot 8 Very Warm E C Warm 7 B Cold 6 A No Heat e Wrinkle-free Options: Extended, Heavy Soil, Soak, Sensitive Hot 8 Very Warm E C Warm 7 B Cold 6 A No Heat e Sanitize Options: Extended, Heavy Soil, Soak, Sensitive Sanitize 9 Max Very Hot ö High Extra White Options: Extended, Heavy Soil, Soak Sanitize 9 Max Very Hot ö High Hot 8 Delic
Using the washer Temperatures Fabric care symbol Woolens / Options: Sensitive Warm 7 B High Cold 6 A Med No Heat e Silk Options: Sensitive Cold 6 No Heat e Handwash / Options: Extended, Heavy soil, Sensitive Warm 7 B Cold 6 A No Heat e Sturdy Options: None Warm 7 Cold 6 No Heat e Custom Options: Extended, Heavy Soil, Soak, Sensitive Sanitize 9 Max Very Hot ö High Hot 8 Med Very Warm E C Low Warm 7 B Slow Cold 6 A Hold No Heat e 10 Spin speed A
Using the washer 4. Select wash options (if needed) The upper button selects the following "OPTIONS": Extended For laundry with normal to heavy soiling or stains. – Extended The main wash cycle time for the wash program will be extended. – Extended and Heavy Soil Heavy Soil – Extended and Soak For heavily soiled laundry where a pretreatment is necessary to remove surface soiling. – Heavy Soil – Soak – no selection Soak The lower button selects the "Sensitive" options.
Using the washer 5. Select the temperature and spin speed The default temperature and spin speed will automatically be selected for each program. However, you can adjust the temperature and spin speed within the parameters of the selected wash program. ^ Press the "TEMP" and "SPIN" buttons until the indicator of the desired setting lights.
Using the washer Special spin options No spin Hold ^ Select "No spin". ^ Select "Hold". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program. – To start the final spin: The laundry is not spun after the final rinse, but the water is drained away. After the drain cycle, the washer goes immediately into the anti-crease cycle. Spinning between these rinses is also omitted in this setting.
Using the washer 6. Add detergent For optimum wash results, it is important to use the correct amount of detergent. Too little detergent may cause – Ineffective cleaning of laundry; fabrics may become gray and stiff over time. – Grease stains on the laundry. – Hard water deposits on the heating element. Too much detergent may cause – Oversudsing with minimal drum movement; poor wash, rinse and spin results. – Higher water consumption through an automatic, additional rinse cycle.
Detergent Use only high-efficiency, low sudsing laundry detergent formulated for front loading washing machines. For wool and wool blend fabrics, use a detergent specially formulated for woolens. Follow instructions on the detergent packaging for the correct use and amount of detergent. Adjust the amount of detergent if the load is smaller or more or less soiled than normal. Add detergent to the main wash compartment j at the beginning of each wash program.
Detergent Water hardness Hardness level Water quality German Water hardness hardness °d in mmol/l 0 - 1.3 0-7 I soft II moderate 1.3 - 2.5 7 - 14 III hard to very hard over 2.5 over 14 Water softener If the water hardness level is between II and III, you can soften the water to reduce detergent consumption. The detergent packaging should indicate the correct amount to use in your machine. Add the detergent, then add the water softener.
Detergent Fabric softener Fabric softener added to the wash program will make fabrics feel softer and will reduce static cling in the dryer. Never mix fabric softener and starch together in the fabric softener compartment §. This will clog the dispenser. ^ Open the lid of the fabric softener compartment §. ^ Pour the amount of liquid fabric softener into the compartment according to the manufacturer’s instructions.
Detergent Starch Mild liquid starch is a synthetic starch wash used to give fabrics some stiffness. Starching can be included in any wash program as part of the final rinse. ^ Open the fabric softener compartment §. ^ Add the recommended amount of starch to the compartment. Do not exceed the maximum level mark. ^ Close the compartment lid and push in the dispenser drawer. ^ The starch will be dispensed during the final rinse.
Using the washer 7. Select Delay Start (if needed) 8. Start the program If you wish, the start of the wash program can be delayed to take advantage of lower energy rates, or to have a load completed at a later time. Delay start allows you to delay the start of a program from 30 minutes to a maximum of 24 hours. ^ Press the "Delay Start" button. The Delay Start time will be extended with each press of the button. – For less than a 10 hour delay, the delay time extends in 30 minute increments.
Using the washer 10. Remove the laundry The "Status" indicator "Anti-Crease / End" will be displayed at the end of a program. ^ Use the "Door" button to open the drum door. Do not attempt to remove laundry from the washer if the drum is turning. You may seriously injure yourself. If the drum turns with the door open, contact Miele’s Technical Service Department. ^ Remove the laundry. ^ Check the folds of the door seal for any small articles which may have been trapped.
Using the washer Cancelling a program You can cancel a wash program any time after a program starts. ^ Press the "Start/Stop T" button. The washer drains the wash water away and the program is cancelled. To add or remove laundry ^ Press the "Door" button. To select another program ^ Turn off the washer using the "On/Off" button. Making changes to the program – A program change is not possible after a program has started. To select a different program, the started program must be canceled.
Using the washer Adding/removing laundry during a wash program You can interrupt the following programs to add or remove a piece of laundry: – Normal – Wrinkle-free – Sturdy ^ Use the "Door" button to open the door. ^ Add or remove the piece of laundry. ^ Close the drum door. The program will continue automatically. Note Once the program has started, the washer cannot make adjustments for the load size.
Locking the washer Electronic program lock Child Safety Lock The program lock prevents the washer from being opened or the program, temperature or spin speed from being changed during a wash program. The Child Safety Lock can be activated to prevent a child from climbing inside the washer. To activate the program lock ^ Once the wash program has started, hold the "Start/Stop T" button until the "Child Lock" indicator illuminates. The program lock is now activated.
Washer care ,Before cleaning the appliance, disconnect the power supply by unplugging the unit or manually tripping the circuit breaker. Cleaning the washer ^ Clean the exterior of the washer with a mild solution of non-abrasive detergent or soap and water. Wipe dry with a soft cloth. ^ Clean the drum with a stainless steel cleaner specially formulated for use in a washing machine. This type of cleaner is available from Miele’s Technical Service Department.
Washer care Cleaning the drain pump Occasionally, small objects (buttons, coins, etc.) may become trapped in the lint trap. If the machine does not drain completely, the lint trap should be checked to ensure that it is free of foreign objects. ^ Turn off the appliance with the "On/Off" button. ^ To clean the lint trap, remove the tool from behind the detergent dispenser drawer. If the main drain hose is clogged, water will be retained in the machine (a maximum amount of 6.5 gal [25 l]).
Washer care Once the flow of water stops: ^ Remove the drain filter lid. ^ Remove any foreign objects or lint from the filter. ^ Check that the drain pump impeller (in the back of the chamber) rotates freely by spinning with your hand. ^ Return the drain filter and tighten into place. ,If the drain filter is not tightened securely, water will leak out when the machine is used.
Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the washer.
Quick Guide 1. Sort the laundry. ^ Empty all pockets. 3. Select a program ^ Select a desired program. ^ Pretreat stains. Refer to the "Program guide" to determine which program is most suitable for the load being washed. 2. Load the laundry 4.Select wash options (if needed) ^ Sort the laundry by fabric and color. ^ Turn on the washer using the "On/Off" button. ^ Open the drum door by using the "Door" button. ^ Load the laundry. ^ Close the drum door.
Quick Guide 5. Select the temperature and spin speed 7. Select Delay Start (if needed) ^ Press the "Delay Start" button. 8. Start the program ^ Press the "Start/Stop" T button. ^ Press the "TEMP" and "SPIN" buttons until the indicator of the desired value lights. 6. Add detergent 9. Activate the program lock (if necessary) ^ Hold the "START" button until the "Child Lock" indicator lights up. 10. Unload the laundry ^ Open the drum door using the "Door" button. ^ Remove the laundry.
Quick Guide Program guide Woolens / Normal Options: Extended, Heavy Soil, Soak, Sensitive Temperatures: Hot 8, Very Warm EC, Warm 7B, Cold 6A, No Heat e Spin speeds: Max, High Items: For a quick load of colorfast items. Wrinkle Free Options: Sensitive Temperatures: Warm 7B, Cold 6A, No Heat e Spin speed: High, Med Items: For hand washable and machine washable wool.
Washer care Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. These filters should be checked every 6 months and cleaned, if necessary. (This may need to be performed more frequently with some water supplies). Cleaning the inlet hose filter ^ Turn off the water valve. ,Inspect the hose regularly. The hose must be in good condition to withstand high water pressure.
Frequently asked questions , Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Frequently asked questions The program was interrupted and a fault message appears. Issue The buzzer sounds, and the "Drain" indicator flashes. "- - -". appears in the display. The buzzer sounds, and the "Intake" indicator flashes. "- - -". appears in the display. The buzzer sounds, and the "Intake" and "Drain" indicators flash. "- - -". appears in the display. The buzzer sounds and the "Soak" and "Rinse" indicators flash. "- - -". appears in the display. Possible cause Solution* The drain is blocked.
Frequently asked questions General issues with the washer Issue The "Oversudsing" indicator lights. The Main wash" indicator flashes. Possible cause The machine has oversudsed. There is a fault. Solution Use less detergent in the next wash program. Restart the program. If the fault message appears again, call Miele’s Technical Service Department. The washer’s four feet Level the machine (see are not resting evenly Installation Instructions.) on the floor. There are unusual There is no fault.
Frequently asked questions Poor wash results Issue Possible cause Solution The wash does not Liquid detergents do not – Use powdered bleach. come clean with contain bleaching – Do not put liquid detergent liquid detergent. agents. Fruit, coffee or and stain remover together in tea stains cannot be the same washcompartment. effectively removed. Laundry has a gray, An inadequate amount – Add more detergent to the laundry or use a liquid sticky residue.
Frequently asked questions The door will not open when the "Door" button is pressed. Possible cause The washer is not hooked up to electricity. The washer is not turned on. The program lock is activated. The Child Lock function is activated. Power failure Solution Insert the plug into the outlet. Turn on the washer using the "On/Off" button. Deactivate the program lock as described in "Locking the washer - Electronic program lock".
Frequently asked questions Opening the drum door during a power failure ^ Open the detergent dispenser drawer. ,Make sure the machine is turned off and the drum has stopped turning. A moving drum is dangerous. ^ Remove the tool. ^ To open the door, pull down on the ring in the upper right corner of the access area. ^ Open the lint trap door. ^ Drain the water from the washer as described in "Washer care / "Cleaning the drain pump and lint trap.
Technical Service Repairs PC Update In the event of any faults which you cannot fix yourself, please contact the Miele Technical Service Department The indicator marked PC allows a technician to make use of new technology if new programs are developed or new fabrics are introduced. U 1-800-999-1360 techserv@mieleusa.com l 1 800 565-6435 service@miele.ca When contacting the Technical Service Department, please quote the model and serial number of your appliance.
INSTALLATION INSTRUCTIONS
Help protect our environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children, as they pose a danger of suffocation. 36 Disposal of an appliance Old appliances may contain materials that can be recycled.
Installation Front view a Hot water intake hose h Control panel b Cold water intake hose i Detergent dispenser drawer c Power cord j Drum door d - g Drain hose (with adjustable and removable elbow) showing drain options k Access panel to drain filter and drain pump l Recessed grip m Four height- adjustable feet 37
Installation Back view a Lid excess end with transport grips e Drain hose b Power cord f Shipping struts with rotary protection c Cold water intake hose g Mounting for: d Hot water intake hose – Water intake hose – Drain hose – Power cord – Shipping struts 38
Installation Installation site A concrete or reinforced floor is the most suitable surface for the washer. These types of floors are less prone to vibration during the spin cycle. Note: – The machine must be leveled and securely positioned. – To avoid vibration while spinning, the machine should not be installed on soft floor coverings. ,If the machine is installed on a raised platform, it must be secured with retaining clips.
Installation Installation Remove the shipping struts ^ Lift the machine from its shipping pallet and move it to the installation site. Do not lift the washer by the drum door! ,Ensure that the machine’s feet and the floor are dry to prevent slippage during the spin cycle. ^ Remove the left and right rotary protection. 1. Unhook the rotary protection with a screw driver. 2. Remove the rotary protection.
Installation ^ Turn the left shipping strut counterclockwise 90° with the enclosed combination wrench. ^ Turn the right shipping strut counterclockwise 90° with the enclosed combination wrench. ^ Pull out the shipping strut. ^ Pull out the shipping strut.
Installation Installing the shipping struts Reinstall the struts by reversing the above procedure. ^ Close the holes with the rotary protection and their caps. ^ Fasten the shipping struts at the rear side of the washer. Take care to insert the drill holes b onto the spigot a. ,Do not move the washer without the shipping struts in place. The shipping struts should be stored in a safe place for future use. They must be reinstalled before moving the machine.
Installation Level the washer To ensure smooth operation, the washer must be level. Failure to level the machine can result in increased water and energy consumption, loud noise during the spin cycle or "walking" across the floor during use. Adjust the four leveling feet The washer is levelled by adjusting the four feet: ^ Tip the machine slightly and place a support, such as a block of wood, underneath it.
Installation Installation beneath a counter Washer/ Dryer Stack If a countertop is placed over the washer, at least a 1/4" gap must be left between the top of the machine and bottom of the countertop; nothing should be within 1/2" of any other side of the washing machine. – When the machine lid needs to be removed to reduce the height of the machine, a countertop kit* is necessary. The cover plate in the countertop kit replaces the machine lid and ensures electrical safety.
Plumbing The washing machine can be connected to a potable water supply. A non-return valve is not required unless required by building code. The washing machine has 1/2" pressure hoses with 3/4" female hose thread connections. If there is no water hookup, contact a plumber to install a connection. Make sure that the sealing ring is seated properly on the hose connector. Replace the hose with a genuine Miele hose only, or with a hose able to withstand up to 145 psi (10 bar) pressure.
Plumbing Water connection Tips for a hot water connection Connect the cold water intake hose (blue mark) to the cold water valve and the hot water intake hose (red mark) to the hot water valve. – The hot water temperature from the hot water valve must not exceed 140°F; the ideal temperature is 130°F.
Plumbing Drainage The 5 foot drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e.g. by tying the hose to the water faucet). 2. To a stand pipe: place the drain hose into a 1 1/2" stand pipe and secure it firmly. ^ The machine drains using a pump with a maximum delivery height of 4 feet. ^ Make sure there are no kinks in the drain hose.
Electrical connection ELECTRICAL INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
49
50
51
Alterations rights reserved / 0704 This bio-friendly paper was bleached without the use of chlorine. M.-Nr.
