Technical data

To switch the fan on s
^
Touch the On/Off sensor s.
The fan will come on at power setting 2.
The On/Off sensor s symbol and the 2
will light up.
To select a power setting
Depending on the intensity of the
cooking vapours, settings 1 to 3 are
usually sufficient for normal cooking.
^
Select the setting you require by
touching the 1, 2 or 3 sensors.
Intensive setting
^ For short periods of cooking food
with intensive vapours and a strong
aroma, e.g. when searing meat, you
may wish to select setting 4, the
Intensive setting.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it always only runs for 10 minutes
before reverting automatically to setting
3.
^
To set this option, both the fan and
the cooktop lighting must be
switched off.
^
Touch the Run-on sensor m for
approx. 10 seconds until the 1 sensor
lights up.
^
Touch in turn
– the cooktop lighting sensor n,
– the 1 sensor, and
– the cooktop lighting sensor n again.
If Automatic switch-off is not activated,
the 1 and 4 sensors will flash.
^ Touch the 4 sensor to activate Auto-
matic switch-off.
The 1 and 4 sensors will now light up
constantly.
Touch the 1 sensor to deactivate the
Automatic switch-off function.
^
Touch the Run-on sensor m to
confirm your selection.
If you do not confirm your selection
within 4 minutes, the rangehood will
automatically revert to the original
setting.
Operation
12