Operating instructions for Washing machine W 149 It is essential to read these operating instructions before installing or using the machine, to avoid the risk of accident, or damage to the machine. G M.-Nr.
Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed safely and kept out of the reach of babies and young children. Danger suffocation! Rather than just throwing these materials away, please ensure they are offered for recycling.
Contents Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Guide to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 General view . . . . . . . . . . . . . . . . . .
Contents Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Care symbols - washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Additional options . . . . . . .
Contents Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Opening the lid in the event of a power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 To check water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 After sales service . . . . . . . . . . . . .
Guide to the machine General view a Mains connection cable e Machine feet b Inlet hose f Flexible drain hose with detachable swivel elbow c Lid with integrated control panel d Access panel for drain pump, drain (fluff) filter and emergency lid release 6
Guide to the machine Control panel a "I-ON/0-OFF" button To switch the machine ON or OFF or to interrupt a programme e "Spin" button for spin speed, Rinse hold and Without final spin c "Lid" button opens the machine lid f Indicator lights showing the selected spin speed d "START" button starts the wash programme g Programme selector can be turned clockwise and anti-clockwise e Buttons for additional options Indicator light on = selected Indicator light off = not selected h Programme sequence indicat
Warning and safety instructions Read the operating instructions before using this machine for the first time. They contain important information about the safety, use and maintenance of the machine. This way you will avoid the risk of accidents and damage to the machine. Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner of the machine.
Warning and safety instructions This machine must only be connected to the on-site water supply using a new hose kit. Old hoses must not be re-used. Check the hose regularly for signs of wear and tear. Change in good time to avoid the risk of leaks and subsequent damage. Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can the safety standards of the machine be guaranteed.
Warning and safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the manufacturer’s instructions given on the packaging. If in doubt, contact the Miele Customer Service Dept. or your Miele Dealer.
Washing environmentally and economically – Water consumption and energy usage are determined by the size of the load. Load to the maximum recommended for the programme selected. – Programme durations can vary considerably due to the automatic load adjustment feature. Depending on the amount of laundry, the main wash may be shortened and one rinse omitted. – Use the Mixed Wash programme or the Quick Wash programme for smaller amounts of laundry.
Before using for the first time Before using the machine for the first time ensure that it is correctly installed and connected. See the relevant section under "Installation". Also check that the fluff filter is securely tightened. Otherwise there is a risk of water leakage during use. For safety reasons spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must run a wash programme without any laundry and without detergent.
How to wash correctly Brief guide The headings numbered (A,B,C,...) show the operating sequence and can be used as a brief guide. Before washing A Sort the laundry. ^ Sort the washing by colour and by care label symbols. Most garments have a textile care label in the collar or side seam. Dark textiles often contain excess dye and should be washed separately several times before being included in a mixed load. Always wash whites and coloureds separately.
How to wash correctly B To switch on the machine Press the "I-ON/0-OFF" button. C Press the "Lid" button. ^ Open the machine outer lid. ^ Press the drum lock (black arrow) and at the same time push the front flap inwards (in the direction of the arrows) until the lock is released. ^ Open the inner lid. ^ Support both flaps and let them swing up. Load the drum: D Open the drum: Take care. The drum flaps are spring-loaded. ^ Gently press your hand against the rear drum flap.
How to wash correctly E Close the drum: ^ First press the front, then the rear drum flap down until both hooks clearly engage. Take care not to trap items of laundry when closing the drum flaps. Failure to observe these instructions may cause damage to the machine and to laundry. ^ Clean the roller on the left-hand hook of the drum flap regularly to ensure smooth operation is maintained. F Before closing the inner lid, pull up and engage properly .
How to wash correctly To start a programme – The programme selector should be pointing to "Finish", the indicator light "Finish" is lit up in the programme sequence display. G Pull out the detergent dispenser drawer. H Add detergent. Dispense according to the amount specified on the packaging. – See section on "Adding detergents" for details. The detergent dispenser drawer must then be pushed back in, otherwise the machine outer lid cannot be closed. I Close the machine outer lid. J Open the stopcock.
How to wash correctly L Select any additional option required. A maximum of two additional options can be chosen per wash programme, provided they are compatible with the programme selected, (see "Programme selection" chart). Only one option can be selected out of "Soak", "Pre-wash" and "Short". In some programmes the maximum spin speed is limited. The machine will not allow a higher spin speed to be selected. (See "Programme selection" chart). N Press the "START" button. The programme now starts.
How to wash correctly After washing S Close the inner lid and the machine outer lid. At the end of a programme T Turn the programme selector to the "Finish" position. When the "Finish" indicator light comes on the laundry can be removed from the drum: O Press the "Lid" button. ^ Open the machine outer lid. P Open the inner lid. Q Open the drum and remove the laundry. Do not forget to remove laundry from the drum. Items left in the drum may shrink.
How to wash correctly Adding or removing laundry after programme start General exceptions: Laundry can be added or removed after any programme has already started. – the suds temperature is above 55°C. ^ Press the "Lid" button once. The drum automatically rotates to the correct position for opening. The "Rinse hold" and "Without final spin" indicator lights flash alternately. The door cannot be opened when: – the programme lock is activated. – the programme has reached the "Final spin" stage.
How to wash correctly Programme . . . To select a different programme proceed as follows: . . . interruption ^ Switch off the machine using the "I-ON/0-OFF" button. ^ Press the "I-ON/0-OFF" button. ^ To continue with the same programme press the "I-ON/0-OFF" button again. . . .
Adding detergent All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), tablets, liquid tablets and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets by proportion to suit smaller loads.
Adding detergent Adding detergent Water softeners A water softener can be used to cut down on the use of detergents in extremely hard water areas. Dispense according to the amount specified on the packaging. First add detergent and then the water softener. Dispense detergent as specified for soft water areas. Miele do not recommend connecting the machine to a household water softener. i = Compartment for pre-wash. This compartment is also used for starch formulations when starching separately.
Adding detergent Automatic dispensing of fabric conditioners, texturisers or starch to laundry at the end of a programme Adding fabric conditioner or texturiser separately ^ Add fabric conditioner or texturiser to compartment p. ^ Turn the programme selector to "Starch". ^ Select a spin speed. ^ Press the "START" button. Starching separately ^ Measure and prepare starch in accordance with the manufacturer’s instructions. ^ Add the starch to compartment i.
Programmes Programme selection Programme Fabric Temperature max. spin speed 95°C to 30°C 1200 60°C 1200 COTTONS e Cottons and linen fabrics, e.g. bed linen, table linen, towelling, jeans, underwear, T-shirts, nappies. COTTONS e Wash load as for standard tests.
Programmes max. load 5 kg Additional options* - Soak Pre-wash Short Water plus (Option 1,2,3,4) 5 kg 2.5 kg 1 kg Fill the drum loosely 1/2 to 3/4 full 1 kg - Soak Pre-wash Short Water plus (Option 1,2,4) With heavily soiled items select "Soak" or "Pre-wash". Wash dark colours in liquid detergent. For normally soiled items select "Short". For test institutes: Programme setting for tests according to EN 60456 Standard Programme. With heavily soiled items select "Soak" or "Pre-wash".
Programmes Sequence COTTONS1) MINIMUM IRON1) DELICATES Silk WOOLLENS / - Soak optional optional optional - Pre-wash optional optional optional - - ß ß ß ß ß programmable - - - - Graduated rinsing - from 40°C - - - No. of rinses - normal 3 or 42) 3 3 2 2 - part load 2 2 - 2 - - short 2 2 3 2 - Rinse and interim spin (rpm) max. 1000 max. 500 - - max. 600 Final spin (rpm) max. 1200 Main wash Top-up rinse from 75°C max. 1200 max. 900 max. 600 max.
Programmes QUICK WASH 40°C Starch Drain/ Final spin MIXED WASH1) Separate rinse high cotton content high polyester content - - - - optional optional - ß - - optional optional ß - - - ß ß - - - - - - - - - - - ß 2 - - 2 3 or 42) 3 2 - - - 2 2 max. 500 - - - 2 max. 900 2 max. 500 max. 1200 max. 1200 max. 1200 max. 1200 max. 900 max.
Programmes Care symbols - washing Care symbols Fabric types e no bar Cottons Description of process Normal (maximum) machine action and normal spinning f* Synthetics Reduced (mesingle bar dium) machine action and reduced spinning g broken bar 28 Woollens Much reduced (minimum) machine action but with normal spinning Programme: Cottons, Minimum iron, Quick wash Delicates *If the gentle action option has been programmed into your machine via the programmable functions, garments with a single bar u
Programmes Important - other care symbols / h apf D y z Hand wash (if a temperature is not specified, use the lowest temperature or cold) Do not wash Dry clean Do not dry clean Suitable for chlorine bleaching Do not use chlorine bleach Tumble dry q At normal temperature r At low temperature s Do not tumble dry Ironing I Hot iron H Medium hot iron G Cool iron J Do not iron N.B.
Additional options To select an additional option to the basic programme press the button for that option. The indicator light for the option comes on. If an additional option is chosen which is incompatible with the basic programme, (see Programme selection chart), the indicator light goes out when the button is released. If a spin speed is chosen which is unsuitable for the programme (see Programme selection chart), pressing the button has no effect.
Additional options Water plus The water level increases in the "COTTONS", "MINIMUM IRON", " QUICK WASH" and "MIXED WASH" programmes. Spin A final spin is carried out at the end of each of the basic programmes, if a spin speed has been selected. "Without final spin" You can choose between four options for the "Water plus" button. The options are explained in "Water plus system" in the "Programmable functions" section.
Additional options Electronic programme locking Programme locking prevents the machine from being opened or the programme being changed during a wash programme. Switching on programme locking A Select a programme, (see "How to wash correctly"). B Press the "START" button for at least 5 seconds. Switching off programme locking early A Press the "START" button for at least 5 seconds.
Programmable functions Maximum water level The water level for rinsing is automatically raised to the maximum level where rinse results are particularly important. It is effective for the rinses in the following programmes: - COTTONS - MINIMUM IRON - QUICK WASH - MIXED WASH - Poly/Cottons Before the "Maximum water level" programmable function can be selected you must first select programming mode. Selecting programming mode A The machine must be switched off and the drum door closed.
Programmable functions Water plus system The "Water plus" button offers four options, increasing water level and / or bringing in an extra rinse cycle. To activate the option press the "Water plus" button when selecting your wash programme before pressing the START button. Option 1 Increase in the rinse water level in the COTTONS, MINIMUM IRON, QUICK WASH and MIXED WASH - Poly/Cottons programmes, where for example rinse results are particularly important.
Programmable functions Selecting the Options Storing in memory By pressing the "START" button a various number of times you can select the other options. To confirm that a new selection has been selected the previous indicator light goes out and a new indicator light comes on. When you have selected the Option you require, SWITCH the machine OFF with the "I-ON/0-OFF" button. The Option is now stored in the machine’s memory. Each time "START" is pressed a different indicator light will come on.
Programmable functions Activating the i compartment This function should be activated if traditional "big box" detergents are used. For the first 10 seconds of the main wash cycle water flows in through compartment i. Compartment j may sometimes not be able to hold the total amount of detergent required when: - the water is very hard (over 3.8 mmol/l, water hardness level IV) and - the washing is heavily soiled. In this case compartment i can be used to flush in the extra detergent for the main wash.
Programmable functions Soak time This is accessed for a programme by pressing the SOAK button on the facia. You can programme a soak time of: - 2 hours (factory setting) or - 1 hour 30 mins or - 1 hour or - 30 mins. A "Soak time" of 2 hours is set at the factory. If you wish to change this standard setting to one of the times listed above, you must first select programming mode. Selecting programming mode A The machine must be switched off and the drum door closed.
Programmable functions Gentle action For gentle washing of slightly soiled items. Drum action is reduced. Gentle action can be used with the COTTONS, MINIMUM IRON, QUICK WASH, Starch and MIXED WASH programmes. If "Gentle action" has been programmed, every wash cycle in these programmes is carried out with gentle action rhythm. Before the "Gentle action" programmable function can be selected you must first select programming mode.
Programmable functions Top-up rinse for Cottons At the end of the main wash additional water flows into the drum and the suds are cooled down. Hot suds can damage plastic drainage pipes. Top-up rinse takes place when temperatures of 95°C and 75°C are selected. Top-up rinse should be activated: – to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin. – where the drainage pipes do not comply with DIN 1986.
Programmable functions Memory function If an additional option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme. The memory function is not active when the machine is first delivered but can be programmed to active. Activating First select programming mode. Selecting programming mode A The machine must be switched off and the drum door closed. The programme selector must point to "Finish".
Cleaning and care E-Cloth Disconnect the appliance from the mains electricity supply and withdraw the plug from the socket prior to cleaning the machine. Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents. These might damage plastic surfaces and other components because of the chemicals they contain.
Cleaning and care Cleaning the detergent dispenser drawer ^ Remove the detergent dispenser drawer. ^ Pull out the conditioner insert and the siphon tube and wash under running warm water. ^ Also clean the channel over which the siphon tube is inserted. ^ Wash under running warm water. ^ Replace the conditioner insert and siphon tube and push the detergent dispenser drawer back into position. Extra cleaning Carrying out a hot wash (70°C or above) with powder detergent approx.
Cleaning and care Cleaning the fluff (drain) filter and pump ^ Place a dish under the drain spout. Check the drain filter initially after 3-4 washes to ascertain how often it is likely to require cleaning. With normal cleaning approx. 2 litres of water run out. If the drain outlet is clogged, more water will be retained in the machine (up to 25 litres). Caution: If laundry has been washed at a high temperature, water draining out of the machine will still be hot. Danger of scalding.
Cleaning and care ^ Once the flow of water ceases, remove the fluff filter completely. ^ Clean the inside of the fluff filter housing. ^ Clean the fluff filter thoroughly. Remove any deposits of limescale and detergent or foreign objects from the thread of the filter housing and filter unit as they can cause water to leak. Limescale deposits are often a sign of using too little detergent. ^ Remove any foreign objects (e.g. buttons, coins, etc.) and fluff.
Cleaning and care Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. ^ First turn off the stopcock. ^ Unscrew the threaded union connecting the free end of the inlet hose to the stopcock. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there are frequent interruptions to the external water supply. ^ Remove rubber seal a from the recess.
Problem solving guide Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Unauthorised repairs could be dangerous. What to do, if . . . Cause . . . . . . the programme does not begin. There is no power. The "Finish" indicator light is not on or the "Start" indicator light is not flashing. Remedy . . . Check that: – – – the lids are properly closed. the mains plug is plugged in.
Problem solving guide What to do, if . . . Cause . . . Remedy . . . . . . the "Check inlet" indicator flashes during the programme but the programme is running normally. The water inlet is restricted. – The stopcock is not opened far enough. – – – The inlet hose is kinked. . . . the "Check inlet" indicator flashes and the laundry was not washed. The water inlet is closed. – – Open the stopcock. . . .
Problem solving guide What to do, if . . . Cause . . . Remedy . . . . . . the indicator light "Drain/Final spin" flashes The final spin has not taken place. The machine detected an imbalance. – Loosen and re-distribute the laundry. – – Select the programme "Spin". Take into account the spin speed of the relevant programme. Programme sequence is not affected. The indicator light goes out when the programme selector is turned back to the programme previously chosen.
Problem solving guide What to do, if . . . Cause . . . Level the machine. See installation. . . . the machine shakes during the spin cycle. . . . the laundry has not been spun satisfactorily . . . the pump makes strange noises. . . . the drum opening is not in the correct loading and unloading position. Remedy . . . The spin speed selected was too low. Select a higher spin speed next time. Always mix large and small The load was not distributed items in the load. evenly enough in the drum.
Problem solving guide What to do, if . . . Cause Remedy . . . large residues of detergent remain in the dispenser drawer. The water supply pressure is too low. – Clean the filter in the water inlet system. – It may be useful to select "Water plus". . . . fabric conditioner is not completely dispensed or too much water remains in the p compartment. Washing powder used with water softener tends to become sticky. The siphon tube is either incorrectly positioned or clogged.
Problem solving guide Opening the lid in the event of a power failure ^ Open the inner lid. ^ Switch off the washing machine. ^ Open the fluff (drain) filter and drain the water as described in "Cleaning and care" - section "Cleaning fluff filter and pump". Always make sure that the drum is stationary before reaching into the machine to remove washing. Reaching into a moving drum is extremely dangerous. To check water pressure ^ Place a bucket under the stopcock. ^ Open the stopcock fully.
After sales service Customer contact Programme update function - PC In the event of any faults which you cannot remedy yourself please contact The programme update function is designed to enable a service technician to update your machine’s electronics in keeping with advances in technology. – Your Miele dealer or – Your nearest Miele Service Department (see back cover for the address).
Installation Installation surface ^ Remove the transit fitting (next page). A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. The appliance must be level to ensure safe and proper operation. Please note the following points: ^ Unscrew the feet until the machine stands level. ^ Hold the foot tight using a pipe wrench. ^ The machine must be level and securely positioned.
Installation Removing the transit fitting ^ Unscrew the 4 outer screws marked A completely. ^ Unscrew the 4 screws marked B. These screws must then be left on the transit bars. ^ Plug the 4 large holes with the caps supplied. The transit fitting together with screws should be stored in a safe place for future use. It must be re-fitted if the machine is to be moved again. Re-fitting the transit fitting To refit the transit fitting reverse the procedure described above. ^ Remove the transit bars.
Installation Connection to water supply The machine should be connected to a mains water supply in accordance with standard regulations. In Germany the washing machine is not required to have a non-return valve as it has been designed to comply with the relevant German DIN standard. Connection to a household water softener is not recommended. Connection to the mains water supply should incorporate a mains stopcock with 3/4’’ thread. The stopcock should be fitted by a qualified plumber.
Installation Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre. The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. Drain hose connection: ^ Direct into a sink: Hook the hose over the edge and secure.
Installation Electrical connection U.K. All electrical work should be carried out only by a suitably qualified and competent person, in strict accordance with national and local safety regulations. The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply. The voltage, rated load and fuse rating are given on the data plate. Please ensure these match the household mains supply.
Installation Non-rewireable plugs BS 1363 If this machine is fitted with a non-rewireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appropriate plug fitted. The fuse carrier and fuse should be removed from the old plug and disposed of. The plug cut from the flexible cord should then be disposed of and on no account be inserted into any socket elsewhere in the house (electric shock hazard).
Consumption data Programme (without any additional options or programmable functions) Load Consumption data Energy Water Programme time COTTONS 95°C 5.0 kg 1.70 kWh 52 litres 1 h 54 mins 60°C* 5.0 kg 0.95 kWh 52 litres 1 h 58 mins 40°C MINIMUM IRON 5.0 kg 0.55 kWh 52 litres 1 h 58 mins 40°C 2.5 kg 0.45 kWh 58 litres 1 h 20 mins 1.0 kg 0.40 kWh 75 litres 58 mins 2.0 kg 0.23 kWh 35 litres 39 mins 1.0 kg 0.
Technical data Height 90 cm Height with lid open 139 cm Width 45 cm Depth 60 cm Weight 93 kg Capacity 5 kg Dry laundry Voltage See data plate Rated load See data plate Fuse rating See data plate Water flow pressure min. 1 bar Static water pressure max. 10 bar Drain pump head height max. 1m Drain pump length max.
Alteration rights reserved/4602/V00 M.-Nr. 05 681 810 This paper consists of cellulose which has been bleached without the use of chlorine.
