Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program and starting it
- 4. Removing the laundry at the end of the program
- Delay Start/SmartStart
- Program chart
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Programmable functions
Initial set-up
22
Logging in via WPS
Turn the program selector to
MobileStart.
Touch the sensor button until
appears on the time display and
a short keypad tone sounds.
The timeout then starts to count down
from 2minutes on the time display.
Activate the WPS function on your
router within 2minutes.
When you have successfully connected,
will appear on the time display.
Tip: If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
Carrying out the procedure for
initial commissioning outlined
in these instructions
Please see “1.Notes on correct
laundry care” and “2.Loading the
tumble dryer”.
You can then load the tumble dryer
and select a program as described in
“3.Selecting a program and starting
it”.