Technical information

Technical Information

G 600/G 800

Component Part Activation

Circulation pump M6 Relay

Drain pump M8 Relay

Heater relay 1K/1 solenoid Thyristor

Power supply relay 1K/6 solenoid Via switch S2 (EWZ 548)

WaterProof System solenoid valves Thyristor

Reactivation solenoid valve Thyristor

Detergent dispenser Y51 solenoid Thyristor

Rinse aid dispenser Y50 solenoid Thyristor

Table 4-11: Activation of Components

4.25.1 Programming after Replacing the Electronic

In addition to intake duration and water softener settings, certain dishwasher

electronics need to be programmed for dishwasher width (45cm or 60cm).

For further details, refer to the model-specific programming and service mode

information.

4.25.2 Electronic Modes

The electronic modes are divided into 3 levels:

 Programming mode

 Service mode 1

 Service mode 2

Programming mode is intended for user access. Service modes 1 and 2 are

designed to be accessed only by qualified service personnel.

Note:

While in service or programming mode, if the dishwasher is switched off or the door

is opened, the dishwasher will automatically exit the current mode and return to

normal operating mode.