Operating instructions for heat pump dryers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Contents Caring for the environment .................................................................................. 2 Warning and Safety instructions ......................................................................... 6 Operating the tumble dryer................................................................................. 17 Control panel.......................................................................................................... 17 Display .........................................
Contents Cleaning and care ................................................................................................ 46 Emptying the condensed water container ............................................................. 46 Preparing the condensed water container for Steam smoothing .......................... 47 Fluff filters .............................................................................................................. 48 Removing visible fluff.........................................
Contents Electrical connection U.K....................................................................................... 76 Consumption data ............................................................................................... 77 Technical data ..................................................................................................... 79 Settings menu ...................................................................................................... 80 Calling up settings ...........
Warning and Safety instructions It is essential to read these instructions. This tumble dryer complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the tumble dryer, please read these instructions carefully before using it for the first time. They contain important information on its safety, installation, use and maintenance.
Warning and Safety instructions This tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation. Safety with children Children under 8 years of age must be kept away from the tumble dryer unless they are constantly supervised.
Warning and Safety instructions The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). Do not connect the appliance to the mains electricity supply by an extension lead, multi-socket adapter or similar.
Warning and Safety instructions This tumble dryer must not be used in a non-stationary location (e.g. on a ship). Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Heat pump technology and refrigerant: The heat pump in this tumble dryer uses a refrigerant which is condensed by the compressor and led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
Warning and Safety instructions Please observe the instructions in "Installation and connection" and the "Technical data". The accessibility of the plug must always be ensured, in order to disconnect the tumble dryer from the mains. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the dryer. Make sure the dryer door can be opened without hindrance after installation.
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – Items which have not been washed. – Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc). If items have not been thoroughly cleaned there is a danger that these might ignite when heated, even after they have been removed from the dryer at the end of the programme. – Items (e.
Warning and Safety instructions Remove all items from pockets (e.g. lighters, matches). Warning: Do not switch the dryer off before the drying programme has finished. If this is done, the laundry must be hung up or spread out to cool it down. Fabric conditioner and similar products must be used according to the instructions on the manufacturer's packaging.
Warning and Safety instructions In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry selfigniting). The programme is not finished until the cooling down phase has been completed. As soon as the programme has finished, remove all laundry from the drum. Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.
Warning and Safety instructions If the water is drained externally through the drain hose instead of being collected in the condensed water container, make sure the drain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage. Condensed water is not drinking water. It can cause health problems in both people and animals if consumed. Always keep the area around the tumble dryer free of dust and fluff.
Warning and Safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that you always keep the flacon, or the fluff filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place down on any surface.
Warning and Safety instructions Accessories Only use genuine Miele original spare parts and accessories with this appliance. If non-Miele parts are used, guarantee, performance and product liability claims will be invalidated. The tumble dryer can be combined with a Miele washing machine in a washer-dryer stack. The appropriate "WTV" stacking kit (available to order) to match your tumble dryer and washing machine is required.
Operating the tumble dryer Control panel a Display with sensors See the following page for more information. f Option buttons Various options can be added to the programmes. b Start/Stop button g Programme selector For selecting the programme. For starting the programme selected and cancelling a programme once it h Optical interface has started. For service technicians. c Drying level button i button For all programmes with a selectable For switching the tumble dryer on drying level. and off.
Operating the tumble dryer Display Settings can be changed to alter the dryer's electronics to suit different requirements. Please refer to "Settings menu" at the end of this booklet for more information. The following programmes are selected using the programme selector at the "Further programmes" position: – Automatic plus – Delicates – Silks handcare , OK, sensors – Sportswear These sensors are used to operate the display when the symbols light up.
Operating the tumble dryer Perfect Dry indicator With programmes with a selectable drying level, the Perfect Dry system calculates the residual moisture present in the laundry to ensure a precise drying result. The Perfect Dry indicator . . . . . . will flash after the programme has started and go out when the programme duration appears in the display. . . . will light up again when the selected drying level is reached and remain on until the end of the programme. . . .
Operating the tumble dryer Examples on how to operate the appliance The sensor highlights the next value and the sensor highlights the previous value. The OK sensor is used to confirm selection of the highlighted value. Scrolling through a list The option which can be selected will be highlighted with a white bar. If no selection is made the display will revert to the previous menu.
Before using for the first time Removing the protective foil and stickers Remove – the protective foil from the door. – any stickers from the front and the lid. Please do not remove any labels (e.g. the data plate), visible when you open the door. After installing the dryer Before using the tumble dryer for the first time, ensure that it is installed and connected to the electricity supply correctly.
Before using for the first time Setting the time of day (if necessary) Completing the procedure for using for the first time outlined in these instructions Only touch the sensor if you would like a 12 hour clock display. Information Clock format 24 h clock Follow the instructions in the setting the machine up for the first 12 h clock Confirm by touching the OK sensor. Time of day 12 : 00 Touch the sensor to decrease or the sensor to increase the hour.
EcoFeedback You can use the EcoFeedback sensor to call up information about the energy consumption of your dryer. Touching the EcoFeedback sensor will call up two types of information: – an estimate of the consumption before the programme begins – the energy consumption during the programme. The EcoFeedback sensor will light up and information will appear in the display. Both will go out automatically a few seconds later or alternatively they can be confirmed with OK.
1. Notes on correct laundry care Points to note regarding washed laundry – When washing very heavily soiled items ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. – Do not put soaking wet items into the tumble dryer. Make sure your laundry is thoroughly spun before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
1. Notes on correct laundry care Garment care label symbols Drying Normal/higher temperature Reduced temperature: Select Gentle tumble (for delicate textiles) Do not tumble dry Ironing Very hot Hot Warm Do not iron Laundry care when drying in a tumble dryer See the "Programme chart". This describes the programmes and gives their maximum load. – Load according to the optimum amount of laundry recommended for the programme being used. Underloading is uneconomical.
2. Load the tumble dryer It is essential to read "1. Notes on correct laundry care" first of all. Press the button to switch the dryer on. The interior drum lighting will come on. The interior drum lighting will automatically go out after a few minutes and/or after the start of a programme to save energy. Open the door If you are not using a fragrance flacon: the tab must be pushed down completely (see arrow). Close the door Reach under the door grip and pull the door open.
3. Select a programme and start it Select a programme You can use the programme selector to select the following: Further programmes The further programmes can be selected via the display. – one of the programme names on the control panel, or – Further programmes or – Favourites or – Mixed items Further programmes Automatic plus Delicates Silks handcare Turn the programme selector.
3. Select a programme and start it Programmes with drying levels – Cottons, Minimum iron, Delicates, Denim, Shirts, Express, Gentle smoothing, Steam smoothing, Automatic plus, Sportswear, Outerwear The drying level can be altered after selecting one of these programmes. The duration and the pre-set drying level will be displayed in addition to the programme name. Cottons 10:00 Duration 2:57 h Normal Press the Drying level button.
3. Select a programme and start it Other programmes and the timed drying programmes – Cottons , Woollens handcare, Silks handcare, Standard pillows, Proofing, Cottons hygiene The programme duration is pre-set and cannot be altered. – Cool air, Warm air, Basket programme You can select the duration in tenminute stages.
3. Select a programme and start it Select any options or delay start (if required) Options Drying and the programme duration will light up in the display. The drying level reached will light up instead of Drying later on, during programmes with a selectable drying level. The Perfect Dry indicator will only flash/ light up with programmes with selectable drying levels (see also "Operating the tumble dryer"). Cooling down will light up in the display shortly before the end of the programme.
4. Remove the laundry End of programme/Anti-crease At the end of the programme: Anticrease (if selected) or Finish will light up. The Start/Stop button will no longer be lit up. Check that all items have been removed from the drum. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used. To save energy, 10 minutes after the end of the programme the Start/Stop button will begin to flash slowly and the display will go out.
Options odours will not be removed as effectively from parts of garments made of synthetic fibres. Auto load control This option should be used if you only want to dry half the load given in the display and quoted in the "Programme chart". In this case, by pressing this button, you can both shorten and optimise the drying process. The options are switched on or off by pressing the appropriate button.
Options The following options can be selected in addition to the programme: Gentle tumble1 Freshen up1 Auto load control1 Anticrease Buzzer – – – X X Cottons X X X X X Minimum iron X X X X X Woollens handcare – – – – X Denim X X – X X Shirts X X – X X Express – – – X X Gentle smoothing O – – X X Steam smoothing – – – X X Automatic plus O – – X X Delicates O – – X X Silks handcare – – – X X Sportswear O – – X X Standard pillows
Favourites Selecting extra options You can save your own customised programmes under names of your choice. Extras These favourite programmes will be sorted alphabetically. Turn the programme selector to Favourites. Gentle tumble Freshen up Auto load control Select and confirm the one you want. 1. Create Extras Favourite programmes Gentle tumble Create Confirm Create with the OK sensor. Touch the or sensor to highlight the programme you want.
Favourites Summary The programme will be saved as a favourite. Summary Changing a favourite programme Accept Cottons Normal Select Accept and confirm. 2. Entering a name You can enter a name of up to 10 characters. Enter name Favourite programmes Change Delete Dry-Plus Select Change. Select the favourite programme you want to change.
Mixed items Back For drying a mixed load of items which can be compiled from a list. This returns you to Select items. Turn the programme selector to Mixed items. Finish selection (saving) Touch the or sensor to highlight items. Once you have made your selection and are ready to start drying, confirm with the OK sensor. Confirm the items you want by touching the OK sensor. The dryer has put together the optimum programme.
Delay start To select delay start With delay start you can delay the start of the programme by up to a maximum of 24 hours. Please note that the time of day must be entered correctly for the delay start function to work. After selecting the programme, press the Delay start button. Start at 12 : 00 The time at which the programme will start automatically will appear in the display. The drum will turn briefly every hour until the start of the programme to reduce creasing.
Programme chart Cottons ** Max. load 9.0 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note – Items are dried to a Normal level only. – The Cottons programme is the most energy-efficient for drying cotton items with normal residual moisture levels. Cottons Max. load 9.
Programme chart Minimum iron Max. load 4.0 kg* Normal plus, Normal, Slightly dry, Hand iron , Hand iron Use for Minimum iron items made of cotton, synthetic or mixed fibre, e.g.: workwear, tunics, tops, dresses, trousers, table linen and socks. Woollens handcare Max. load 2.0 kg* Use for Woollen garments and fabric containing wool blends, e.g. pullovers, jackets and socks. Note – Wool and wool blend items are only fluffed up; they are not dried completely.
Programme chart Express Max. load 4.0 kg* Extra dry, Normal plus, Normal, Slightly dry, Hand iron , Hand iron , Machine iron Use for Garments suitable for the Cottons programme. Note The programme duration is shorter. Gentle smoothing Max. load 1.0 kg* Normal, Hand iron Use for – Cotton and linen fabric – Minimum iron items made of cotton, synthetic or mixed fibre, e.g. trousers, jackets, shirts. Notes – Suitable for dry and damp laundry.
Programme chart Steam smoothing Max. load 1.0 kg* Normal, Hand iron Use for – Cotton and linen fabric – Minimum iron items made of cotton, synthetic or mixed fibre, e.g. trousers, jackets, shirts. Notes – For all items which require – dampening before ironing. – creasing to be removed. – Select Hand iron if the items are to be ironed after drying. – Water will be taken from the condensed water container during this programme.
Programme chart Delicates Max. load 2.5 kg* Normal plus, Normal, Slightly dry, Hand iron , Hand iron Use for Delicate items with the symbol on the care label made of synthetic fibre, mixed fibre, rayon and easy care cotton, e.g. shirts, blouses, lingerie and appliqued garments. Note Reducing the load will reduce creasing. Silks handcare Max. load 1.0 kg* Use for Silk garments which are suitable for drying in the tumble dryer, e.g. blouses and shirts Note – This programme reduces creasing.
Programme chart Outerwear Max. load 2.5 kg* Normal, Hand iron Use for Outerwear which is suitable for drying in a tumble dryer. Proofing Max. load 2.5 kg* Normal Use for Drying microfibre fabric, skiwear, outerwear, fine, closeweave cotton garments (poplin) or tablecloths which are suitable for drying in a tumble dryer and have been treated to provide a water and dirt resistant finish. Notes – This programme includes a proofing fixing phase.
Programme chart Basket programme Notes Max. load for basket 3.5 kg – This programme may only be used with the Miele drying basket (optional accessory) fitted. – Use this programme to dry or air items which are suitable for drying in a tumble dryer but which are not suitable for drying using mechanical action. – It is essential to observe the operating instructions for the drying basket. Use for See the operating instructions supplied with the drying basket. Cottons hygiene Max. load 4.
Changing the programme sequence You cannot change to another programme once a programme has started (this prevents unintentional alterations). If you move the programme selector, Programme cannot be changed will light up in the display until you move the programme selector back to the original programme. You will need to cancel the current programme before you can select a new one. Once a programme has started ... ...
Cleaning and care Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying programme. Empty the container will light up if the maximum level of the condensed water container is reached. To delete Empty the container: open and close the door with the dryer switched on.
Cleaning and care Preparing the condensed water container for Steam smoothing Condensed water which has collected in the condensed water container is directed into the drum in the Steam smoothing programme. The condensed water container must therefore be filled with water up to at least the –min– marker. 1 spout, 2 rubber seal Pour the water in through the rings of the spout 1. Only use clean water. The water must not contain any fragrance, detergent or other substances.
Cleaning and care Fluff filters This tumble dryer has 2 fluff filters in the door opening: the upper and lower fluff filters trap fluff produced during the drying process. Removing visible fluff Remove any fluff after every drying cycle. Tip: You can also use a vacuum cleaner so that you can remove the fluff without touching it. Remove the fluff (see arrows) . . . Open the door. You must remove the fragrance flacon (if present) beforehand. See "Fragrance flacon". . . .
Cleaning and care Cleaning the fluff filters and air flow openings thoroughly Hold the dial and pull the fluff filter forwards to remove it. If the drying duration has become longer or the surface of the filters is visibly compacted with fluff, you should carry out the following cleaning procedure. If using a fragrance flacon make sure you remove it beforehand. Pull the upper fluff filter forwards to remove it.
Cleaning and care Plinth filter Only clean the plinth filter when Clean out airways lights up. To delete Clean out airways: Switch the dryer off and back on again / confirm OK. Removing the plinth filter will cause the right hand guide pin in the dryer to come out. This pin ensures that the heat exchanger access panel can only be closed if the plinth filter is inserted the right way round. Cleaning the plinth filter Removing the plinth filter Pull the handle out of the plinth filter.
Cleaning and care Cleaning the plinth filter panel Checking the condenser unit Danger of injury. Do not touch the cooling fins. You could cut yourself. Look to see if fluff has accumulated. If there is visible soiling: Clean using a vacuum cleaner Use a damp cloth to remove any fluff. Make sure that you do not damage the rubber seal when doing this. with a dusting brush attached. Carefully pass the vacuum cleaner brush over the heat exchanger cooling fins without applying any pressure.
Cleaning and care Replacing the plinth filter The dryer can only be operated with the plinth filter fitted correctly and the heat exchanger access panel closed. The access panel must be closed correctly to ensure that water cannot leak from the condenser system and to ensure that the dryer functions efficiently. Fit the filter back on the handle. Make sure it is the correct way round.
Cleaning and care Tumble dryer Disconnect the tumble dryer from the mains electricity supply. Do not use solvents, abrasive cleaners, glass cleaners or allpurpose cleaners. These could damage plastic surfaces and other parts. Clean the tumble dryer with a slightly damp cloth and a mild non-abrasive cleaning agent or a solution of washing-up liquid and water. Clean the seal around the inside of the door with a damp cloth. Dry all parts with a soft cloth.
Fragrance flacon Using a fragrance flacon (optional accessory) will add a pleasant fragrance to your laundry. Before using a fragrance flacon, please read "Warning and safety instructions - Using a fragrance flacon (optional accessory)". If you are not using a fragrance flacon: the cover must always remain closed (push the cover down completely with the tab). Inserting a fragrance flacon Only hold the fragrance flacon as illustrated.
Fragrance flacon – You will feel a slight resistance and hear a soft click. Marker must be in position : this is the position at which you can feel a resistance. Before drying You can select the intensity of the fragrance. Markers and must line up with one another. Turn the outer ring clockwise: the further you open the flacon, the more intense the fragrance. Turn the outer ring clockwise a little.
Fragrance flacon Damp laundry and longer drying durations with sufficient heat transfer are needed for the fragrance to be released into the laundry effectively. The fragrance will also be noticeable in the room air during the process. Fragrance is not released when using the Cool air programme. Replacing the fragrance flacon When the fragrance is no longer sufficiently intense: After drying To avoid the fragrance escaping needlessly: Turn the outer ring anti-clockwise until markers a and b line up.
Fragrance flacon – when purchasing new fragrance flacons: only remove the protective seal just before use Cleaning the fluff filters The intensity of the fragrance will be diminished if the fluff filters and the plinth filter are not cleaned. The fragrance filter must be removed before cleaning the fluff filter. Never lay the fragrance flacon down on any surface as the fragrance will leak.
Problem solving guide With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances must only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
Problem solving guide Problem Cause and remedy There is a build-up of fluff in the airways. Clean the fluff filters. lights up at the end of a Clean the plinth filter. programme See "Cleaning and care". Information Clean out airways To switch off the message: Confirm with OK. Clean out airways Clean the fluff filter and check the airways. An excessive amount of fluff has built up. Clean the fluff filters. Clean the plinth filter.
Problem solving guide Problem Comfort cooling 60 Cause and remedy The programme has finished but the laundry has not yet cooled down. Either remove the laundry and spread it out to cool down or leave it in the tumble dryer to cool down during the cooling phase.
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not sufficiently dry The load consisted of different types of fabric. Finish drying using the Warm air timed drying programme. Select a different programme next time. Tip: You can alter the residual moisture level for some programmes. See "Settings menu".
Problem solving guide Other problems Problem Cause and remedy The drying process goes on too long or even switches off * The room in which the dryer is located is too warm. Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters. Clean the fluff filters and the plinth filter. Remove any visible fluff: . . . bottom left, from behind the panel in the heat exchanger cavity (see "Cleaning and care"); . . .
Problem solving guide Problem Cause and remedy There are humming noises This is not a fault. A programme does not start No obvious cause. Connect the tumble dryer to the mains Turn on the tumble dryer Close the door Check whether the mains fuse has tripped The compressor (heat pump) is operating or you have selected the Steam smoothing programme. No action is required. These noises are quite normal and can be heard when the compressor or the condensed water pump is operating.
Problem solving guide Bottom right grille In general, the cooling fins behind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an exceptionally long time due to a very high level of dust or fluff in the room in which the dryer is located. First open the plinth filter panel (bottom left). Then insert a spoon handle behind the grille on the right hand side. Lever off the grille at the top (1.). Lever off the grille at the bottom (2.).
Problem solving guide Fluff filter in the condensed water container If you are experiencing problems running the Steam smoothing programme, the fluff filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked. Guide the end of the hose through the opening and hold it securely with one hand. Use your other hand to pull the fluff filter off the hose. Rinse the fluff filter with a jet of water until all the fluff has been removed.
Problem solving guide Steam smoothing spray jet Limescale deposits will impair the spray jet. In this case, the spray jet must be removed and replaced with a new one (see "Optional accessories"). Open the door of the tumble dryer. The spray jet is located in the top left of the door opening. The spray jet can only be replaced using the special tool supplied with the new spray jet. Do not use any other tool as this would damage the spray jet or the dryer.
After sales service Repairs Optional accessories In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or the Miele Service Department. Optional accessories for this tumble dryer are available from Miele, your Miele dealer or via the internet at: Contact details for Miele are given at the end of this booklet. N.B. A call-out fee will be charged for service visits where the problem could have been resolved as described in these instructions.
Installation and connection Front view a Mains connection cable b Control panel c Condensed water container – empty after every drying cycle d Door – do not open during drying 68 e Heat exchanger access panel – do not open during drying f Four height adjustable screw feet g Cool air intake grille – do not obstruct with a laundry basket or other objects h Hose for external drainage of condensed water
Installation and connection Rear view If transporting the dryer at an angle, only tip towards the left side.
Installation and connection Installation Levelling the dryer Make sure the dryer door can be opened without hindrance after installation. Ventilation The cool air intake at the front of the dryer must not be blocked or covered. This would hinder a sufficient intake of cool air for the heat exchanger. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the dryer.
Installation and connection Additional installation requirements Pushing the dryer under a worktop This tumble dryer is suitable for pushing under a worktop. It is very important to avoid a build-up of heat. The warm air which is expelled from the dryer must be able to dissipate. Warm air which cannot dissipate could cause a fault. – The appliance lid cannot be removed. – The electrical socket must be located in an accessible position near the appliance. – Drying durations may increase slightly.
Installation and connection External condensed water outlet Notes When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be drained away via the drain hose so that the condensed water container does not have to be emptied. Drain hose length: 1.60 m Maximum delivery head: 1.50 m Maximum drain hose length: 4.
Installation and connection Arranging the drain hose Do not pull on the drain hose and do not stretch it or allow it to become kinked. This could damage the hose. There will be a small amount of residual water left in the drain hose. Have a container ready to collect this. Guide the hose to the right or left side of the dryer, as required. – If you are guiding it to the right you can fit the hose into the groove. – Leave the hose in the lower holder to prevent it from being kinked by mistake.
Installation and connection Examples – Drainage into a sink or floor gully Direct connection to a sink drain outlet Use the hose holder to prevent the drain hose from becoming kinked. Remove the following from the back of the dryer at the top: Adapter 1 and hose clip 3 behind it. Press the small catches on the left and right of the hose holder with your thumbs (black arrows) and ... ... pull the hose holder forwards to remove it (white arrows).
Installation and connection Fit adapter 1 to the sink drain outlet using nut 2. The nut is usually fitted with a washer which must be removed. Attach the end of the hose 4 to adapter 1. Use the hose holder. Use a screwdriver to tighten hose clip 3 up close to the nut. Fit non-return valve 5 to tumble dryer drain hose 6. 1. Adapter 2. Nut 3. Hose clip 4. End of the hose (secured with the hose holder) Non-return valve 5 has to be fitted so that the arrow points in the direction of flow (i.e.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Cottons 2 kg 9.0 Final spin speed in a domestic washing machine rpm 1000 Cottons Normal 4.5 9.0 Load1 Residual Energy Duration moisture % 60 kWh 2.15 min 178 1000 1200 60 53 1.20 1.95 105 161 9.0 1400 50 1.85 153 9.0 1600 44 1.65 136 + Gentle tumble 9.0 1000 60 1.95 166 + Freshen up Cottons Hand iron 3.0 9.0 1000 1000 60 60 1.00 1.58 86 122 9.0 1200 53 1.40 107 9.0 1400 50 1.30 100 Minimum iron Normal 9.0 4.0 1600 1200 44 40 1.10 0.
Consumption data The consumption data shown in the EcoFeedback display can vary from the consumption data quoted here. The variations arise from the way the data is measured in the dryer. For example, the programme duration may vary depending on the residual moisture present in the laundry and the type of fabric which will affect the energy requirement.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Suitable for pushing under a worktop Yes Suitable for stacking Yes Weight approx. 61 kg Drum volume 120 litres Load size 9.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.60 m Maximum delivery head 1.50 m Maximum drain hose length 4.00 m Length of connection cable 2.
Settings menu Calling up settings Changing a setting You can use the Settings menu to alter the dryer's electronics to suit different requirements. Settings can be altered at any time. Touching the or sensor will call up the different options for the setting. For example, you can – select a value. If the option is marked with a , it is active, Opening the Settings menu Switch the dryer on. The programme selector must not be at the Further programmes/Favourites/ Mixed items positions.
Settings menu Time of day First select either a 24 hour or 12 hour clock. You can then set the current time of day. Clock format – 24 h clock – 12 h clock Select the clock format you want with the or sensor and confirm with the OK sensor. Set the time of day Use the or sensor to enter the hour and confirm your entry with the OK sensor. Use the or sensor to enter the minutes and confirm your entry with the OK sensor.
Settings menu – Light Clean out airways appears when there is only a small build-up of fluff. Buzzer volume The buzzer can be set to be louder or quieter. The setting selected is shown in a bar chart. Factory default: a medium setting. – Quieter – Louder You will hear the buzzer change as the setting is selected. Keypad tone When this function is activated a tone will sound each time a button is pressed.
Settings menu Code The code prevents your dryer being used without your knowledge. Options – Activate The code is 250 and can be activated. When the code has been activated, you have to enter the code after switching the dryer on. Otherwise the dryer cannot be operated. – Deactivate For using the dryer without entering the code. This only appears if the code has been activated previously. – Change You can enter a code of your own. Important. Make a note of your new code.
Settings menu Appliance switch-off To save energy the dryer will switch off automatically after 15 minutes. You can lengthen or shorten the time. The dryer will switch off automatically after 10, 15 or 20 minutes, – if no further selection is made after switching the dryer on – at the end of the anti-crease phase – after a programme without an anticrease phase has finished. However, there is no automatic switchoff in the event of a fault.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Miele (Shanghai) Trading Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500, Fax: +86 21 6157 3511 E-mail: info@miele.
TKR 650 WP en-GB M.-Nr.
