Technical data

4 Service

4.1 Programming mode summar y

Initial requirements

A The dryer is set up and installed correctly.

A End the current program as well as the demo mode.

A Open the door.

Accessing

Note

Access has to be completed within 10 s.

A Press the Start/Stop pad and hold it.

A Close the door.

A As soon as the Start LED flashes, release the Start pad.

A Immediately press Start 5 x and at the 5th time, hold it until the Start/Stop

LED flashes rapidly (5Hz).

Acknowledgement indicator

Start/Stop LED flashes rapidly (5 Hz).

If access is not successful, the control automatically reverts to the normal

programming mode.

Options

A Select the programming function: Press the Buzzer pad.

The buzzer pad shows the programming function via a flashing rhythm.

A Select the option: Press the Start/Stop pad.

The Drying LED shows the Option selected via a flashing rhythm.

Warning!

For the dryer to function properly, specific options for the country it is operating

in have to be selected.

The service department software has to be adapted.

Descriptive Technical Documentation

DTD no. 12-9800 090-17