Technical data

2 Function
2.1 Dryer function after a power interruption
The dryer continues automatically at the point the program was interrupted.
2.2 Programming function
2.2.1 Reset
Reset all programming options to factory setting.
x
Note
The reset takes effect immediately, it's not possible to restore the previous
settings!
Operating hours are not reset.
Not possible with service department electronics.
2.2.2 Programming function drying outcome (residual moisture) Cottons/Hot
Drying can be set more damp or more dry, to suit customer preference.
2.2.3 Programming function drying outcome (residual moisture) Permanent
press
Drying can be set more damp or more dry, to suit customer preference.
x
Permanent press more damp standard more dry
Normal dry 4 % 2 % 0 %
Table 2: Residual moisture Permanent press
2.2.4 Memory
When the memory function is activated, the extra features selected at the start of
a program are saved. When the same program is selected again, these extra
features are automatically called up.
2.2.5 Programming function – Additional cooldown phase
Applies only to residual moisture programs.
An extended cooldown time reduces the temperature of the laundry at program
end. The result is that the laundry feels less damp.
The cooldown time extension has no effect on timed drying programs.
Descriptive Technical Documentation
DTD no. 12-9800 090-3
05.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.