Technical data
3.4 LED Rotary iron flashes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-8
3.5 LED Hand iron flashes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-9
3.6 All program LEDs flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-10
3.7 F 0 No fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-10
3.8 F 1 Short circuit in NTC temperature sensor heating/drying
(2R30) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-11
3.9 F 2 Open circuit in NTC temperature sensor heating/drying
(2R30) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-11
3.10 F 3 NTC temperature sensor drying air (1R30) – Short circuit . . 090-13
3.11 F 4 NTC temperature sensor drying air (1R30) – Open circuit . . 090-13
3.12 F 50 Motor stalls and heater is on for 3 seconds . . . . . . . . . . . . . 090-14
3.13 F 55 Overriding time limit exceeded, approx. 180 min . . . . . . . . . 090-14
3.14 F 66 Air leakage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-16
4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-17
4.1 Programming mode summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-17
4.2 Demonstration mode – Activate / Deactivate . . . . . . . . . . . . . . . . 090-19
4.3 Service mode summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-20
4.4 Program selection module (EW) - Service view. . . . . . . . . . . . . . 090-22
4.5 Program selection module (EW) and fascia support panel –
Remove. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 090-22
100 Electrical system
1 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-2
4 Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-3
4.1 Fuses – Replace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-3
Descriptive Technical Documentation
DTD no. 12-9800 3
05.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.










