Operating instructions

Fault Possible cause Remedy
Drying times are
too long.
The fluff filters
might be clogged up.
– Clean as described in
“Cleaning and Care”.
Ventilation to and from
the dryer is insufficient
(e.g. in a small room).
– Open a door or window
while the machine is
operating to increase air
flow.
The ventilation ducting
or room ventilation (e.g.
window or wall vents
are blocked.
– Remove any objects that
are causing the blockage.
The laundry was not
sufficiently spun.
– Spin the laundry in the
washing machine at the
highest possible speed.
Metallic components
e.g. zips have prevented
the dryer from
registering the correct
moisture level in the
laundry.
– Complete the drying
process using a Timed
Drying progamme.
If after checking all the above, drying times are still too
long, there may be a fault. Contact the Service Dept.
The heater limiter has
automatically switched
off one or more
heater elements.
– Contact the Service Dept.
Problem solving guide
19