Operating instructions

d Main venting duct
We recommend that when several
dryers are being installed each dryer
should be fitted with one non-return flap
installed directly on the main venting
duct (R, upper picture). Extra Miele
equipment is required for this purpose.
When up to five dryers are being
installed, the pipe diameter D must be
increased according to Table III.
Number of
Dryers
Magnification factor
for the pipe diameter
from Table II
2
3
4 - 5
1
1.25
1.5
1 Connection to the main venting duct
2 Miele non-return flap
3 Additional Miele adapter
4 Miele vent hose, very flexible
^
Push the non-return flap (2)
completely into the adapter (3).
Installation - venting
36