Operating Instructions Vented Dryer T 1413 T 1415 To prevent accidents and machine damage, read these instructions before Installation or use. UV M.-Nr.
Table of Contents IMPORTANT SAFETY INSTRUCTIONS Control panel Before loading the dryer Using the dryer 1. Turn on the dryer and load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2. Select a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. Select a drying option (if needed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. Select the dryness level. . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS ,WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances. They may give off vapors that could ignite or explode. Do not allow children to play on or in the appliance.
IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Control panel a e- "PROGRAMS" buttons For selecting a drying program. b "OPTIONS" buttons For selecting a drying option. c "DRYNESS" button For selecting the dryness level of finished laundry. d "STATUS" display Shows the current cycle of the drying program. e "Buzzer" button When selected, a buzzer will sound at the end of a program. g "Start/Stop" button T Starts and stops a program. Interrupts a program when pressed. Flashes during program selection and lights once the program starts.
Before loading the dryer Program recommendations The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions". ^ Before using for the first time clean the drum with a cloth. Before drying, check fabric care labels for special drying instructions.
Using the dryer 1. Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - do not push it shut. For best results use liquid fabric softener when washing laundry. Fabric softener sheet may clog the filters and cause the dryer to overheat.
Using the dryer Program Normal When to use Extra Dry Multi-layer, mixed loads of sturdy cottons, e.g. jeans, towels. More Dry Uniform loads of cottons, e.g. sheets, underwear, socks. Normal Knitted items that may shrink, e.g. jersey material or lightweight cottons. Less Dry Cotton or linen fabrics to be left damp for ironing. Hand Iron Rotary Iron Note Available drying options: Turbo, Full load, Gentle, Anti-crease The "Extra Dry" program should not be selected for jersey materials.
Using the dryer 3. Select a drying option (if needed) OPTIONS Turbo Fast drying for sturdy fabrics with increased temperature and a reduced program length. Full load Select this option for efficient drying of a standard size load. Gentle For drying delicate fabrics at a lower temperature with an extended program time. ^ A drying option can be selected or deselected with each press of the button. Anti-crease Prevents wrinkles if laundry is not removed immediately after the end of a program.
Using the dryer 4. Select the dryness level 5. Select the buzzer (if desired) The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^ Press the "Buzzer" button to have a tone beep at the end of the program.
Using the dryer 6. Start the program 7. At the end of a program The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected. ^ Press the "Start/Stop T" button. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details. ^ Press the "Door" button. ^ Open the door. ^ Remove the laundry.
Using the dryer Canceling or changing a program Adding or removing laundry during a program ^ Press and release the "Start/Stop T" button to stop the drying program. ^ Turn off the dryer using the "On/Off" button. To continue drying: ^ Press the "Door" button. ^ Select the new program by pressing the e or - button. ^ Open the door. ^ Select any desired options. ^ Select a dryness level (available in the "Normal" and "Wrinkle-free" programs).
Child lock Child lock To deactivate the child lock When activated, the child lock prevents the dryer from being operated by locking the control panel functions. Repeat steps 1. to 5. The dryer can be turned on but not started. The "Child lock" indicator will flash. The "Child lock" indicator will go out. The control panel is now unlocked. 6. Turn off the dryer using the "On/Off" button. The door can be opened. To activate the child lock 1. Make sure the dryer is turned off and the door is closed. 2.
Dryer care Cleaning the lint filter ,A clogged filter is a fire hazard! The lint filter must be cleaned after every program. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Open the door and remove the lint filter by gently lifting it upwards. ^ Any lint remaining in the hollow part of the door can be removed through the gap at the bottom with a dust brush or vacuum. ^ Return the lint filter and close the door. The lint filter can be rinsed with hot water if necessary.
Dryer care Cleaning the exterior and the control panel ,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface. ^ The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.
Dryer care Changing the light bulb ,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Open the door. The bulb cover is located along the upper rim of the drum opening. ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate.
Frequently asked questions What if the dryer will not run? Possible fault Fix The "Start/Stop T" button was not pressed. Make sure the dryer is on. Press the "Start/ Stop T" button to begin the drying program. The circuit breaker tripped or the dryer is unplugged. Make sure the dryer is plugged in or reset the circuit breaker. The door is not closed. Close the door properly. How do I prevent static cling? Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.
Frequently asked questions What if the "Filter/Vent" indicator lights after cleaning the exhaust system? Possible fault Fix The dryer is not operating efficiently because the duct hose is too long. Check the exhaust length and diameter (see "How to calculate the effective duct length"). A long exhaust hose will increase program times and energy consumption. If the exhaust hose cannot be shortened, the indicator can be turned off by a service technician.
Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the dryer.
Quick Guide 1.Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry into the drum. Make sure that there is enough space in the drum for clothes to tumble freely. ^ Press the e or - button until the desired program indicator lights. 3. Select a drying option (if needed) To prevent fabric damage, check that laundry will not be caught in the closed door.
Quick Guide 4. Select the dryness level 5. Select the buzzer (if desired) 6. Start the program ^ Press the "Start/Stop T" button. 7. At the end of a program The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Press the selection button until the desired indicator illuminates. ^ Clean the lint filter. ^ Press the "On/Off" button to turn off the dryer.
Quick Guide Program Normal When to use Extra Dry For laundry to be folded and shelved immediately, e.g. jeans, towels. More Dry For uniform loads, e.g. sheets, underwear, socks. Normal For knitted items that may shrink, e.g. jersey material or lightweight cottons. Less Dry For items to be left damp for ironing. The "Extra Dry" program should not be selected for jersey materials. Items may shrink. If items are still damp, dry again using "More Dry".
Technical Service In the event of a fault you cannot fix yourself, please contact the Miele Technical Service Department U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca PC Update The indicator on the control panel marked PC allows a technician to update the dryer to make use of new technology. For example, if new programs or fabrics are developed, a service technician will be able to modify the existing program cycles accordingly.
20
Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. Before installation, disconnect the tumble dryer from the electrical supply by shutting off the power main, unplugging the power cord or tripping the circuit breaker. Do not restore power until the installation is complete. GROUNDING INSTRUCTIONS This appliance must be grounded.
Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Disposal of an appliance Old appliances may contain materials that can be recycled.
Washer / Dryer Stack The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit is available from your Miele dealer or the Miele Technical Service Department. Height of vent adapter in a stacked installation Miele washer with a flat or angled control panel ,Installation of the stacking kit must be performed by a Miele authorized technician. 5’ 6 3/8" (168.
Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Installation a Exhaust connection: The exhaust hose can be installed either at the rear, left or right of the dryer.
Installation Leveling the dryer Determining the position of the exhaust connection The exhaust connection can be left at the rear of the dryer (factory standard) or moved to the left or right side of the dryer. Changing the position of the exhaust connection ^ Remove the exhaust connection cover on the left or right side of the dryer. The dryer must be level to ensure safe and proper operation. Minor discrepancies do not however, have an adverse effect on operation.
Installation Installation tips An airflow gap of 3/8" (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toekick or thick piled carpets. Do not install the dryer next to a refrigerator. The warm air exhausting from the dryer can affect the thermostat of the refrigerator, causing it to run continuously.
Installation Exhaust connection with a flexible exhaust hose or rigid pipe Window connection Using the connector supplied, an exhaust hose (4" [100 mm] diameter) can be installed. Necessary materials: – a wall or window duct – an exhaust hose made of approved non-flammable material 1 Window connection (installed in a plexiglass pane) 2 Connector for the flexible exhaust hose Wall connection with rigid pipe ^ Install the connector, 1, with the exhaust hose or pipe, 2, to the dryer.
Installation Direct wall connection Dryer side view Necessary materials: – a wall pipe – flexible foam gasket Dryer top view 1 Wall pipe 2 Flexible foam gasket 1 Wall pipe 2 Flexible foam gasket ^ Connect the flexible foam gasket, 2, to the wall pipe connector, 1. ^ Push the dryer to the wall.
Installation How to calculate the effective duct length The overall duct length will determine the duct diameter. ^ Measure the actual duct length needed to go from the dryer’s exhaust connection to the vent outlet: 1. Establish the number of elbows or bends necessary, noting the type of bend, angle and radius involved (see Table). Tips about the ductwork – Check with your local building code to determine the maximum allowable duct length. – Use flexible metal pipe or rigid metal pipe for venting.
Installation Additional duct lengths (4" rigid pipe only) Type of bend Radius ft Additional duct length cm ft cm 25 25 5’ 11" 4’ 11" 8’ 2" 180 150 250 25 25 3’ 3" 1’ 11" 2’ 7" 100 60 80 7’ 6" 230 2’ 4" 70 Wall vent or window vent – with louvers – with flap 12’ 5" 4’ 11" 380 150 Exhaust connection – left or right side 3’ 3" 100 Flexible metal duct – 3’ 3" (1 m) straight – 45° angle – 90° angle Smooth metal duct – 3’ 3" (1 m) straight – 45° angle – 90° angle 10" 10" 10" 10" Elbow 90° s
Installation Example: Calculating the effective duct length and required internal duct diameter Rigid pipe Duct length ft Duct length m A Wall duct with louvered wall vent 12’ 5" 3.8 m B 90° bend 2’ 7" 0.8 m C 20" (0.5 m) rigid pipe 1’ 7" 0.5 m D 90° bend 2’ 7" 0.8 m E left vent opening 3’ 3" 1.0 m 22’ 5" 6.9 m Total duct length The total duct length is less than 33 feet (10 m), so a duct diameter of 4" (100 mm) with adapter is sufficient.
34
35
All rights reserved / 1705 M.-Nr.
